Publications

Over the years, EcoBuild has published a large amount of scientific papers and articles. On this page we have gathered and sorted it all based on publishing year.

2017

Scientific publications

Peer review papers

  • Joffre, T et al. (2017) Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography. Industrial crops and products 95: 43-49
  • Nore, K et al. (2017) Moisture buffering, energy potential, and volatile organic compound emissions of wood exposed to indoor environments. Science and Technology for the Built Environment 23, nr 3: 512-521
  • Wadsö, L., Johansson, S., Bardage, S. (2017) Monitoring of fungal colonization of wood materials using isothermal calorimetry. International Biodeterioration & Biodegradation 120: 43-51

2016

Scientific publications

Peer review papers

  • Källbom, S. et al. (2016) Water vapour sorption characteristics and surface chemical composition of thermally modified spruce. International Wood Products Journal, nr 3: 116-123
  • Ringman, R et al. (2016) Effects of thermal modification on Postia placenta wood degradation dynamics: measurements of mass loss, structural integrity and gene expressionInternational Biodeterioration & Biodegradation, Vol. 50, nr 2: 385-397
Textbook chapters, theses and reports
  • Sandin, G., Peters, G., Svanström, M. (2016) Life Cycle Assessment of Forest Products: Challenges and Solutions
  • Jermer, J., Bardage, S., Anderson, T., Nilsson, N. (2016) Försök med olika material i bryggor vid Öresund: Lägesrapport nr 3
Additional presentations at conferences and seminars
  • Tuominen, M et al. (2016) Superamphiphobic overhang coating on a biobased material. Annual Surface and Materials Chemistry Symposium and Materials for tomorrow, ASMCS 2016, November 8-10, 2016, Gothenburg, Sweden

2015

Scientific publications

Peer review papers

  • Jones, D. (2015) Development of novel bio based panels for use in internal door manufacture.  Book of Abstracts of the Joint Technical Workshop of COST Action FP1303 and COST Action FP1404 – Performance Testing and Testing Methodologies of Non-Wood Biobased P. 27-28
  • Jermer, J. (2015) Impregnerat virke har många miljöfördelar. Miljöaktuellt
  • Sundqvist, B. (2015) Impact of cold temperatures on the shear strength of Norway spruce joints glued with different adhesives. European Journal of Wood and Wood Products P. 225-233
  • Jones, D. et al. (2015) Book of Abstracts of the Joint Technical Workshop of COST Action FP1303 and COST Action FP1404 – Performance Testing and Testing Methodologies of Non-Wood Biobased Materials, p. 86 SP rapporter
  • Sandin, G. et al. (2015) The method’s influence on climate impact assessment of biofuels and other uses of forest biomass, p 71 Externa vetenskapliga publikationer
  • Zelinka, S. et al. (2015) The Role of Chemical Transport in the Decay Resistance of Modified Wood. Proceedings of the Eighth European Conference on Wood Modification,  p. 35-43 Externa vetenskapliga publikationer
  • Pilgård, A., Ehmcke, G., Koch, G., Richter, K. (2015) Improvement of a Method for Topochemical Investigations of Degraded Furfurylated Wood. Proceedings of the Eighth European Conference on Wood Modification, p. 311-319 Externa vetenskapliga publikationer
  • Segerholm, K. et al. (2015) Evaluation of Differences in Thermal Modification as a Result of Depth Profiling. Preliminary Investigations into Material Treated Using the Firmolin ™ Process Proceedings of the Eighth European Conference on Wood Modification p. 263-271 Externa vetenskapliga publikationer
  • Laine, K. et al. (2015) Hardness, Set-recovery and Micromorphology Studies of Densified and Thermally Modified Wood Proceedings of the Eighth European Conference on Wood Modification p. 248-254 Externa vetenskapliga publikationer
  • Källbom, S. et al. (2015) Surface Chemical Analysis and Water Vapour Sorption of Thermally Modified Wood Exposed to Increased Relative Humidity Proceedings of the Eighth European Conference on Wood Modification  p. 241-247 Externa vetenskapliga publikationer
  • Kutnar, A., Jones, D. (2015) COST Action FP1407 – Understanding wood modification through an integrated scientific and environmental impact approach Proceedings of the International Panel Products Symposium 2015 p. 305-308 Externa vetenskapliga publikationer
  • Beikircher, W., Schmid, J., Fragiacomo, M., Jones, D. (2015) COST Action FP1404 Fire Safe Use of Bio-Based Building Products Proceedings of the International Panel Products Symposium 2015 p. 301-303 Externa vetenskapliga publikationer
  • Jones, D. (2015) Performance of bio-based building materials – viewpoints from the first year of COST Action FP1303 Proceedings of the International Panel Products Symposium 2015 p. 201-209 Externa vetenskapliga publikationer
  • Hastrup, A. et al. (2015) Performance of a new water-based fire retardant in wood-based panels Proceedings of the International Panel Products Symposium 2015 p. 71-80 vetenskapliga publikationer
  • Kutnar, A., Jones, D. (2015) COST Action FP1407 – Understanding wood modification through an integrated scientific and environmental impact approach Proceedings of the International Panel Products Symposium 2015 p. 305-308 Externa vetenskapliga publikationer
  • Sandin Albertsson, G., Roos, S. (2015) Hitchhikers, Star Wars and Environmental Hot-spots of Textile Value Chains 5th Avancell conference vetenskapliga publikationer
  • Laine, K. et al. (2015) Acetylation and densification of wood. Northern European Network for Wood Science and Engineering. 11th Annual Meeting 2015 vetenskapliga publikationer
  • Östlund, Å. et al. (2015) Textilåtervinning: tekniska möjligheter och utmaningar Rapport 6685 p. 115 Externa vetenskapliga publikationer
  • Peters, G. et al. (2015) Carbon footprints in the textile industry. Handbook of Life Cycle Assessment (LCA) of Textiles and Clothing p.  3-30
  • Roos, S., Sandin Albertsson, G., Zamani, B., Peters, G. (2015) Environmental assessment of Swedish fashion consumption : Five garments – sustainable futures. Mistra Future Fashion Deliverable No: D2.6 p. 22
  • Cruz, H., Jones, D., Nunes, L. (2015) Wood. Materials for Construction and Civil Engineering : Science, Processing, and Design p. 557-583
  • Sandin Albertsson, G. (2015) Life cycle assessment in the development of forest products: Contributions to improved methods and practices.  p. 106
Textbook chapters, theses and reports
  • Olsson, S., Östmark, E., Westin, M. (2015) A SEM study on the use of epoxy functional vegetable oil and reactive UV-absorber as UV-protecting pretreatment for wood. Polymer degradation and stability, Vol. 113, nr 3: 40–45
  • Ringman, R., Pilgård, A. (2015) New insight regarding mode of action of brown rot decay of modified wood based on DNA and gene expression studies: A review. International Wood Products Journal, Vol. 6, nr 1: 5-7
  • Källbom, S., Wålinder, M., Segerholm, K., Jones, D. (2015) Surface energy characterization of thermally modified spruce using inverse gas chromatography under cyclic humidity conditions. Wood and Fiber Science, Vol. 47, nr 4: 410-420
  • Sandin, G., Peters, G., Svanström, M (2015) Using the planetary boundaries framework for setting impact-reduction targets in LCA contexts. The International Journal of Life Cycle Assessment, Vol. 20, nr 12: 1684-1700
  • Sandin, G. et al. (2015) Allocation in LCAs of biorefinery products: implications for results and decision-making. Journal of Cleaner Production, Vol. 93, nr 4: 213–221
  • Sterley, M., Blomqvist, L., Sandberg, D., Johansson, J. (2015) The effect of veneer modification on the bond-line strength in laminated veneer products. Pro Ligno, Vol. 11, nr 4: 43-49
  • Aspling, J., Henriksson, M. (2015) EcoBuild Activity Report 2014
  • Bardage, S., Larsson Brelid, P., Jermer, J. (2015) Pilotprojekt 10 – Testbäddar för livslängdsbedömning av biobaserade material
  • Henriksson, M., Aspling, J. (2015) EcoBuild Newsletter June 2015
  • Olsson, S. (2015) Enhancing UV-protection of Clear Coated Wood by utilizing Reactive UV-absorber and Epoxy Functionalized Soybean Oil
  • Humar, M., et al. (2015) Introduction of the COST FP 1303 Cooperative Performance Test
  • Östlund, Å et al. (2015) Textilåtervinning: tekniska möjligheter och utmaningar
Additional presentations at conferences and seminars
  • Jermer, J. (2015) The Swedish Wood Preserving Industry – Facts and Figures. Proceedings of the 110th Annual Meeting of the American Wood Protection Association P. 8
  • Jermer, J. (2015) Service life of wooden constructions outdoors above ground – Guidance on design and selection of material. PROPUESTA DE WORKSHOP A CELEBRAR PARA EL PROYECTO BIA 2013-042434R
  • Källbom, S. (2015) Surface Chemical Analysis and Water Vapour Sorption of Thermally Modified Wood Exposed to Increased Relative Humidity. Eighth European Conference on Wood Modification 2015-10-26—27
  • Laine, K. (2015) Hardness, Set-recovery and Micromorphology Studies of Densified and Thermally Modified Wood. Eighth European Conference on Wood Modification 2015-10-26—27
  • Segerholm, K. (2015) Evaluation of Differences in Thermal Modification as a Result of Depth Profiling. Preliminary Investigations into Material Treated Using the Firmolin ™ Process. Eighth European Conference on Wood Modification 2015-10 -26—27
  • Pilgård, A., Ehmcke, G., Koch, G., Richter, K. (2015) Improvement of a Method for Topochemical Investigations of Degraded Furfurylated Wood. Eighth European Conference on Wood Modification 2015-10 -26—27
  • Zelinka, SL. (2015) The Role of Chemical Transport in the Decay Resistance of Modified Wood. Eighth European Conference on Wood Modification 2015-10 -26—27
  • Jones, D. (2015) Natural fibres in modern construction – meeting the challenges from users and competing materials. FiberTies – 1st Fiber Symposium 2015-10-22—23
  • Segerholm, K., Henriksson, M. (2015) Wood based building materials – renewed materials streams, some examples of our activites at SP. FiberTies – 1st Fiber Symposium 2015-10-22—23
  • Henriksson, M. et al. (2015) Trash-2-Cash: Designed high-value products from zero-value waste textiles and fibres via design driven technologies. EPNOE Joint Pre Conference Workshop 2015-10-18
  • Sandin Albertsson, G. et al. (2015) The method’s influence on climate impact assessment of biofuels and other uses of forest biomass. Open seminar 2015-10-15
  • Jermer, J. (2015) Dagens regelverk för trästolpar m a p träskydd. Seminarium om stolpar i eldistributionen 2015-10-15
  • Beikircher, W., Schmid, J., Fragiacomo, M., Jones, D. (2015) COST Action FP1404 Fire Safe Use of Bio-Based Building Products. COST Action FP1303 2015-10-08
  • Jones, D. (2015) Performance of bio-based building materials – viewpoints from the first year of COST Action FP1303. COST Action FP1303 2015-10-08
  • Kutnar, A., Jones, D. (2015) COST Action FP1407 – Understanding wood modification through an integrated scientific and environmental impact approach. COST Action FP1303 2015-10-08
  • Hastrup, A. (2015) Performance of a new water-based fire retardant in wood-based panels. International Panel Products Symposium 2015 2015-10-07–08
  • Sandin Albertsson, G., Roos, S. (2015) Hitchhikers, Star Wars and Environmental Hot-spots of Textile Value Chains. 5th Avancell conference 2015-10-06–07
  • Henriksson, M. (2015) Trash-2-Cash: Designed high-value products from zero-value waste textiles and fibres via design driven technologies. 5th Avancell conference 2015-10-06–07
  • Jermer, J. (2015) Detta bör en byggvaruhandlare veta om impregnerat trä. Trä- och bygghandelsdagen 2015-09-30
  • Rowell. R (2015) Alternatives to preservative-treated wood. Trä- och bygghandelsdagen 2015-09-30
  • Laine, K. et al. (2015) Acetylation and densification of wood. 11th Annual Meeting 2015 2015-09-14–15
  • Sandin Albertsson, G., Roos, S., Peters, G., Svanström, M. (2015) Using the planetary boundaries for evaluating interventions for impact reduction in the clothing industry. 7th International Conference on Life Cycle Management 2015-08-30–09-02
  • Peñaloza, D. et al. (2015) The method’s influence on climate impact assessment of biofuels and other uses of forest biomass. 7th International Conference on Life Cycle Management 2015-08-30–09-02  
  • Jermer, J. (2015) Aspects and thoughts regarding the future of the wood preserving industry and research. Spring Meeting
  • Bardage, S. (2015) Testbed for durability of biobased materials. Biobased materials for the future 2015-04-14
  • Henriksson, M. (2015) Introduction Ecobuild. Biobased materials for the future 2015-04-14
  • Östmark, E. (2015) Biorefined chemicals for binder applications. Biobased materials for the future 2015-04-14
  • Wålinder, M., Jones, D., Segerholm, K., Seltman, J. (2015) Surface modification concepts for wood using UV laser ablation. Advances in modified and functional surfaces. Final COST meeting of COST Action FP1006 2015-04-08—09
  • Jones, D. (2015) Commercial biobased wood coatings – the current market position. Advances in modified and functional surfaces. Final COST meeting of COST Action FP1006 2015-04-08—09
  • Jones, D. et al. (2015) Development of novel bio based panels for use in internal door manufacture. Joint Technical Workshop of COST Action FP1303 and COST Action FP1404 2015-03-04–05
  • Östlund, Å. (2015) Textil i ett hållbart samhälle. Vad händer med massaveden? 2015-02-03–04
  • Östlund, Å. (2015) Ekoeffektiva textilfibrer från skog och marknadens drivkraft – ForTex. Ekmandagarna 2015 2015-01-27–28
  • Sandin Albertsson, G. (2015) Sustainability assessment in early stages of technology development. Global Chemical Sustainability 2015-10-01
  • Wålinder, M., Jones, D., Segerholm, K., Seltman, J. (2015) Surface modification concepts for wood using UV laser ablation.  Advances in modified and functional surfaces. Final COST meeting of COST Action FP1006

2014

Scientific publications

Peer review papers

  • Olsson SK, Johansson M, Westin M, Östmark E. Reactive UV-absorber and epoxy functionalized soybean oil for enhanced
    UV-protection of clear coated wood. Polymer Degradation and Stability, 2014, 110, 405-414.
  • Olsson SK, Matsunaga H, Kataoka Y, Johansson M, Matsumura J, Westin M, Östmark E. A SEM study on the use of epoxy
    functional vegetable oil and reactive UV-absorber as UV-protecting pretreatment for wood. Submitted to Polymer Degradation
    and Stability 2014.
  • Olsson SK, Johansson M, Westin M, Östmark E, Trey S. Effect of lignin structures on the reactions with epoxidized vegetable oils.
    Submitted to Holzforschung 2014.
  • Ringman R, Pilgård A, Brischke C, Richter K. Mode of action of brown rot decay resistance in modified wood: A review.
    Holzforschung, 2014, 68, 239–246.
  • Ringman R, Pilgård A, Richter K. Effect of wood modification on gene expression during incipient Postia placenta decay.
    International Biodeterioration & Biodegradation, Part B, 2014, 86: 86-91.
  • Ringman R, Pilgård A, Richter K. In vitro oxidative and enzymatic degradation of modified wood. International Wood Products
    Journal. In press.
  • Alfredsen G, Pilgård A. Postia placenta decay of acetic anhydride modified wood – effect of leaching. Wood Material Science &
    Engineering, 2014, 9, 162-169
  • Alfredsen G, Ringman, Pilgård A, Fossdal CG. New insight regarding mode of action of brown rot decay of modified wood based
    on DNA and gene expression studies: a review. International Wood Products Journal. In press.
  • Zimmer K, Høibø OA, Vestøl GI, Larnøy E. Variation in treatability of Scots pine sapwood: a survey of 25 different northern
    European locations. Wood Science and Technology, 2014, 48, 1049-1068.
  • Zimmer K, Treu A, McCulloh KA. Anatomical differences in the structural elements of fluid passage of Scots pine sapwood with
    contrasting treatability. Wood Science and Technology, 2014, 48, 435-447.
  • Sandin Albertsson G, Clancy G, Peters G, Svanström M, ten Hoeve M. Making the most of LCA in technical inter-organisational
    R&D projects. Journal of Cleaner Production, 2014, 70, 97-104.
  • Sandin G, Peters G, Svanström M. Life cycle assessment of construction materials: the influence of assumptions in end-of-life
    modelling. The International Journal of Life Cycle Assessment, 2014, 19, 723-731.

Conference papers and posters

  • Ehmcke G, Ringman R, Pilgård A, Richter K. 2014. Improvement of a cytochemical method for localization of hydrogen peroxide
    and adaptation to furfurylated wood. Proceedings of the 10th Meeting of the Nordic Baltic Network in Wood Material Science &
    Engineering (WSE). October 13-14, Edinburgh, Scotland.
  • Pilgård A, Ringman R, Kölle M, Brischke C, Richter K. 2014. Expression of Postia placenta wood degradation genes in thermally
    modified wood. Proceedings of the 10th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE).
    October 13-14, Edinburgh, Scotland.
  • Pilgård A, Arnold P, Richter K. 2014. Protein extraction from wood decay fungus Postia placenta. Proceedings IRG Annual
    Meeting, IRG/WP 14-10827.
  • Ringman R, Pilgård A, Richter K. 2014. In vitro oxidative and enzymatic degradation of modified wood. European Conference on
    Wood Modification. March10-12, Lisbon, Portugal.
  • Alfredsen G, Ringman R, Pilgård A, Fossdal CG. 2014. New insight regarding mode of action of brown rot decay of modified
    wood based on DNA and gene expression studies. The 7th European Conference on Wood Modification.
  • Ringman R, Pilgård A, Alfredsen G, Goodell B, Richter K. 2014. Possible targets of wood modification in brown rot degradation.
    The International Research Group on Wood Protection, IRG/WP/14-40676.
  • Treu A, Gobakken LR, Larnøy E, Alfredsen G. 2014. Tremodifisering – Acetylering. In: Trebehandling – innovasjon, metoder og
    trender. Norsk institutt for skog og landskap. pp 27-29.
  • Treu A, Zimmer K. 2014. Furfurylated wood for the use in marine environment – the influence of wood species on the polycondensation of furfuryl alcohol. Northern European Network for Wood Science and Engineering (WSE); October 13-14.
  • Zimmer K, Larnøy E, Treu A. 2014. A guideline for sorting easy to impregnate Scots pine sapwood based on three treatability
    studies from Northern Europe. Annual Meeting of the International Research Group on Wood Protection. May 11-15.
  • Zimmer K, Treu A, Høibø OA, Vestøl GI, Larnøy E. 2014. Anatomical causes for refractory behaviour of Scots pine sapwood.
    European Conference on Wood Modification. March 10-12.
  • Zimmer K, Treu A. 2014. Differences in ray anatomy between high and low permeability Scots pine sapwood. Northern
    European Network for Wood Science and Engineering (WSE). September 11-12.
  • Lübke ML, Hill CAS, Pfriem A. 2014. Bound water in small wood samples investigated by low-field nuclear magnetic resonance.
    Northern European Network for Wood Science and Engineering (WSE). October 13.
  • Sandin G, Peters GM, Svanström M. 2014. How can we develop forest products for the future? Poster contribution to the Marcus
    Wallenberg Prize (MWP) Symposium, Stockholm, Sweden.
  • Røyne F, Peñaloza D, Sandin G, Svanström M, Berlin J. 2014. Climate impact assessment in forest product LCAs – implications of
    method choice for results and decision making. Oral presentation (by Røyne F) at the SETAC 20th LCA Case Study Symposium,
    Novi Sad, Serbia.
  • Jones D, Sundqvist B, Wännström S, Mackintosh W, Malmberg J, Stenemyr. 2014. “Furu2Furan” – An overview of a Swedish
    project developing furanic chemical routes from lignocellulosic residue streams. Cost Action FP1105 fifth workshop,
    November 11-12, Thessaloniki, Greece.
  • Pilgård A, Ringman R, Richter K, 2014. The role of Fenton derived hydroxyl radicals in oxidative and enzymatic degradation
    of furfurylated wood. XXIV IUFRO World Congress October 5-10, 2014, Salt Lake City, UT, United States.
Textbook chapters, theses and reports

Theses

  • S Olsson. Enhancing UV protection of Clear Coated Exterior Wood by Reactive UV absorber and Epoxy Functional Vegetable
    Oil. Doctoral thesis 2014, KTH Royal institute of technology, Stockholm, Sweden.
Popular science publications
  • SVT/UR, the ForTex consortium contributed with lab illustrations on how textiles can be prepared from wood. 201411
    http://www.ur.se/Produkter/184047-Kvalitet-Haute-couture-pa-auktion (The program ”Kvalitet”, minute 23)
  • Henriksson M. Demonstrators for Ekoportal2035 SP Wood Technology Newsletter, March 2014.
  • Henriksson M. Rewarding course in wood chemistry. SP Wood Technology Newsletter, May 2014.
  • Henriksson M. Forest day for parliamentarians. SP Wood Technology Newsletter, September/October 2014.
  • Olsson S. Extended collaboration with Japan. SP Wood Technology Newsletter, April 2014.
  • Östmark E. Our international collaborations. SP Wood Technology Newsletter, May 2014.
Additional presentations at conferences and seminars
  • Henriksson M. Nya produkter av skogsråvara. Temadag om familjeskogsbrukets roll i ett alltmer biobaserat samhälle för riksdagsledamöter arrangerad av LRF Mälardalen och Mellanskog. August 8, 2014, Härjarö, Sweden.
  • Sundqvist B. BioCoilCoat – ökat innehåll av biobaserade kemikalier i grön bandlack. Slutkonferens Branschforskningsprogrammet
    för skogs- och träindustrin, VINNOVA, January 16, 2014, Stockholm, Sweden.
  • Sundqvist B. Furan based binders and applications through smart and integrated use of biomass. SPIRE Brokerage event.
    October 21, 2014, Brussels, Belgium.
  • Sundqvist B. BioCoilCoat – Förnyelsebara kemiska komponenter i bandlacker. Workshop – Nya samarbeten och idéer inom
    läkemedel livsmedel, kemi och skogskemi, SP Sveriges Tekniska Forskningsinstitut, December 2, 2014, Stockholm, Sweden.

2013

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • *Segerholm, K., Larsson Brelid, P., Wålinder, M., Westin, M. and Frisk, O. (2013). Biological outdoor durability of WPC with chemically modified wood. International Wood Products Journal.

Peer review papers

  • Alfredsen, G., Flæte, P .O., Militz, H. (2013). Decay resistance of acetic anhydride modified wood – A review. International WoodProducts Journal, 4: 137-143.
  • Alfredsen, G., Pilgård, A. Postia placenta decay of acetic anhydride modified wood – effect of leaching. WSE special issue, WoodMaterial Science & Engineering. Accepted
  • Bardage, S., Westin, M., Fogarty, H. A.,Trey, S. (2013). The effect of natural products treatment of Southern Yellow Pine on fungicausing blue stain and mold. International Biodeterioration & Biodegradation, Volume 86, Part B, January 2014: 54-59.
  • Laine, K., Segerholm, B.K, Wålinder, M.E.P., Rautkari, L. Ormondroyd, G., Hughes, M., Jones, D. (2014). Micromorphological studies of surface densified wood. Journal of Materials Science, 49(5), 2027-2034.
  • Ringman, R., Pilgård. A., Brischke. C., Richter. K. (2013). Mode of action of brown rot decay resistance in modified wood: A review.Holzforschung. 68(2): 239-246.
  • Wadsö, L., Johansson, S., Pilgård, A., Alfredsen, G. (2013). The activity of a wood-decaying fungus during drying and rewettingcycles measured by isothermal calorimetry. Engineering in Life Sciences 13: 536-540.
  • Wålinder, M.E.P., Larsson Brelid, P., Segerholm, B.K., Long II, C.J. and Dickerson, J.P. (2013). Wettability of acetylated Southern yellow pine. International Wood Products Journal, 4(3): 197-203.

Conference papers and posters

  • Alfredsen, G., Pilgård, A. (2013). Effect of leaching on Postia placenta decay of acetic anhydride modified wood. Proceedingsfrom the 9th meeting of the North European network in Wood Material Science and Engineering, Hannover, Germany.
  • Gobakken, L. R., Bardage, S., Long II, C. J. (2013). Surface moulds and staining fungi on acetylated wood – effect of increasingacetyl content. International Research Group on Wood Protection, IRG/WP 13-10797.
  • Henriksson, M., Aspling, J., Östmark, E. (2013). EcoBuild – A competence Centre for ecoefficient and durable wood-based materials and products. Poster at the The 44th Annual Meeting of The International Research Group on Wood Protection, Stockholm, Sweden.
  • Jellison. J., Goodell, B., Alfredsen, G., Eastwood, D., Daniel, G., Craig, S., Grace, K. (2013). What molecular biology can tell us about the biodegradation of lignocellulose: the utilization of molecular techniques for the detection, identification and enhancedunderstanding. International Research Group on Wood Protection, IRG/WP/ 13-20528
  • Johansson, S., Wadsö, L., Pilgård, A., Alfredsen, G. (2013). The activity of a wood-decaying fungus during drying and rewettingcycles measured by isothermal calorimetry. International Research Group on Wood Protection, Stockholm, Sweden. IRG/WP/13-20526.
  • Källbom, S., Segerholm, B.K., Jones, D., Wålinder, M.E.P. (2013). Surface energy characterization at different moisture levels ofthermally modified wood using inverse gas chromatography. Proceedings from the 9th meeting of the Northern EuropeanNetwork for Wood Science and Engineering. Brischke, C. and Meier, L. eds. Hannover, Germany, pp. 130-135.
  • Källbom, S., Segerholm, B.K., Jones, D., Wålinder, M.E.P. (2013). Surface energy characterization of thermally modified woodusing inverse gas chromatography. The 44th Annual Meeting of the International Research Group on Wood Protection, Stockholm,Sweden. IRG/WP 13-20532.
  • Källbom, S., Wålinder, M.E.P., Segerholm, B.K., Jones, D. (2013). Physio-chemical characterization of THM modified wood usinginverse gas chromatography (IGC). 3rd Action Annual Conference COST Action FP0904, Evaluation, processing and predictionof THM treated wood behaviour by experimental and numerical methods. 35-36.
  • Olsson, S., Johansson, M., Trey, S., Westin, M., Östmark, E. (2013). Modified vegetable oils as “green” protection of exterior wood.Poster at the Marcus Wallenberg Prize Award, Stockholm, Sweden.
  • Olsson, S.K., Johansson, M., Westin, M., Östmark, E., Trey, S. (2013). Effect of lignin structure on the reactivity of epoxidized vegetable oils. Proceedings from the Smart and Functional Coatings Conference, Turin, Italy. Also submitted to a special issue ofProgress In Organic Coatings in December 2013.
  • Olsson, S.K., Johansson, Östmark, E., M., Westin, M., Trey, S. (2013). Modified vegetable oils as “green” protection of exterior woodmaterials – Improved understanding of protection mechanism using epoxy functional oils. Poster at the 44th Annual Meeting ofthe International Research Group on Wood Protection. Stockholm, Sweden.
  • Ringman, R., Pilgård, A., Richter, K. (2013). Postia placenta cellulase gene expression in modified wood during incipient decay.The 44th Annual Meeting of the International Research Group on Wood Protection. IRG/WP 13-40626.
  • Ringman, R., Pilgård, A., Richter, K. (2013). The effect of wood modification and gene expression in incipient Postia placentadecay. Biodeterioration of Wood and Wood Products. 24-27 April, Tartu, Estonia.
  • Ringman, R., Pilgård, A., Richter, K. (2013). Effects of wood modification on gene expression during incipient Postia Placenta decay.Proceedings of the 9th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering. Hannover, Germany.
  • Segerholm, B.K., Ibach, R.E. (2013). Moisture and Fungal Durability of Wood-Plastic Composites Made With Chemically Modifiedand Treated Wood Flour. The 44th Annual Meeting of the International Research Group on Wood Protection. Stockholm, Sweden.IRG/WP 13-40648.
  • Trey, S., Bardage, S., Westin, M., Fogarty, H.A. (2013). The effect of select natural products on wood mold and black stain propagation. Poster at the 2nd International Conference on Biodeterioration of Wood and Wood Products, Tartu, Estonia, 24-27 April, pg 76.
Textbook chapters, theses and reports

Theses

  • Sandin, G. 2013 Improved environmental assessments in the development of wood-based products: Capturing impacts of forestry
    and uncertainties of future product systems, Licentiate thesis.
  • Master Thesis 20082013, confidential report.
  • Master Thesis 30102013, confidential report.
Popular science publications
  • Alfredsen, G., Gobakken, L., Larnøy, E., Treu, A. Tremodifisering – acetylering, SKOG 5, 2013.
  • Aspling, J. Nu utökar vi samarbetet med SP Trä, Teknik & Tillväxt, 1, 2013.
  • Aspling, J. Fibrer – bra för både mage och plast, Teknik & Tillväxt, 3, 2013.
  • Den nya textilfibern är här, Nya Wermlandstidningen, 20131120.
  • Forskning – ett roligt område, Borås Tidning, 20130324.
  • Hedlund, M. Den svenska skogen kan klä världen , BioBusiness, 20130517.
  • Henriksson, M. EcoBuild 2013, SP Wood Technology Newsletter, 2, 2013.
  • Kläder av skog kan rädda både pappers- och textilindustrin , Sveriges Radio, 20130425.
  • Kvinnors företagande kan öka tillväxten i Värmland, Sveriges Radio P4 Värmland, 20131120.
  • Kvinnor som bygger Värmland, Karlstad Universitet, 20131115.
  • Köhnke, T. Textilfibrer från svensk skogsråvara, Teknik & Tillväxt, 2, 2013.
  • Morgonsamtal om textilforskning, Sveriges Radio P4 Sjuhärad, 20130918.
  • Ny bioekonomiskt textil av cellulosa ska konkurrera med bomull, The Paper Province, 20131121.
  • Olsson, S. How do oil and lignin interact with each other?, SP WT Newsletter, 1, 2013.
  • Olsson, S. Interactions between modified oil and lignin, SP WT Newsletter, 4, 2013.
  • SP:s forskning ger kläder ett nytt liv , Borås Tidning, 201300306.
  • Så ska svensk textilindustri bli het igen , Sveriges Radio Ekot, 20130425.
  • Ringman, R. Low moisture content protects modified wood, SP WT Newsletter, 5, 2013.
  • Sandin, G. Environmental assessment for better use of wood, SP WT Newsletter, 2, 2013.
  • Söderlind, D. Så kan vi använda skogen i framtiden, Sydved, April, 2013.
  • Östlund, Å. Skog ska bli textilfibrer, Teknik och Forskning, 1, 2013.
  • Östmark, E. Inom EcoBuild utvecklas bandlack med mindre lösningsmedel och mer bioråvara, Teknik & Tillväxt, 2, 2013.
Additional presentations at conferences and seminars
  • EcoBuild Annual Meeting 2013, Stockholm, 2 February.
  • Henriksson, M., Aspling J. EcoBuild, Workshop on: En karta över kompositsverige, ny samverkan och initiativ, Mölndal, 15 October
    2013.
  • Holmberg, H. Nya produkter inom framtidens skogsindustri. Temadag kring marknad och nya produkter, LRF Mälardalen, Uppsala,
    1 October 2013.
  • Nussbaum, R. ForTex, Processum’s Annual Meeting 2013, Örnsköldsvik, 29 May 2013.
  • Sundell, P.E. Industrial aspects of coating technology for corrosion protection. SSF 4th Annual workshop on microstructure, corrosion and friction control. Stockholm, 23 April 2013.
  • Sundell, P.E. Industrial aspects of coating technology for greener corrosion protection. Svenska Kemistsamfundet, Stockholm,
    23 October 2013.
  • Östmark, E. Modifierade vegetabiliska oljor som ”grönt” skydd för exteriört trä, Lantmännens forskningsstiftelses stiftelsedag
    2013, Stockholm, 26 November 2013.

2012

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • Alfredsen, G., Bader, T.K., Dibdiakova, J., Filbakk, T., Bollmus, S., Hofstetter, K. (2012) Thermogravimetric analysis for wood decay characterization. European Journal of Wood and Wood Products 70(4): 527–530.
  • *Alfredsen, G., Flæte, P.O., Militz, H. (2012) Decay resistance of acetic anhydride modified wood – A review. International Wood Products Journal.
  • Almlöf, H., Kreutz, B., Jardeby, K., Germgård, U. (2012) The influence of extended merceriza-tion on some properties of carboxymethyl cellulose (CMC). Holzforschung 66(1): 21–27
  • Bader, T.K., Hofstetter, K., Alfredsen, G., Bollmus, S. (2012) Microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes ver-sicolor – Part I: Changes in chemical composition, density and equilibrium moisture content. Holzforschung 66(2): 191–198.
  • Bader, T. K., Hofstetter, K., Alfredsen, G., Bollmus, S., (2012) Changes in microstructure and stiffness of Scots pine (Pinus sylvestris L) sapwood degraded by Gloeophyllum trabeum and Trametes versicolor – Part II: Anisotropic stiffness properties. Holzforschung 66(2): 199–206.
  • Medronho, B., Andrade, R., Vivod, V., Östlund, Å., Miguel, M. G., Lindman, B, Voncina, B., Valente, A.J.M. (2012) Cyclodextrin-grafted cellulose: Physico-chemical characterization. Carbohy-drate Polymers
  • Gobakken, L.R., Vestøl, G.I. (2012) Surface mould and blue stain fungi on coated Norway spruce cladding. International Biodeterioration & Biodegradation 75: 181–186.
  • *Hietala, A., Stefańczyk, E., Nagy, N.E., Fossdal, C.G., Alfredsen, G. (2012) The suppressive effect of high temperature on wood decay caused by the brown-rot fungus Postia placenta de-pends on wood durability. Holzforschung.
  • Kihlman, M., Aldaeus, F., Chedid, F., Germgård, U. (2012) Effect of various pulp properties on the solubility of cellulose in sodium hydroxide solutions. Holzforschung 66(5): 601–606.
  • *Kihlman, M., Medronho, B., Romano, A., Germgård, U., Lindman, B. (2012) Kinetic and thermodynamic effects on cellulose fibre dissolution in an Alkali Based Solvent: Influence of Additives and Pretreatments. Holzforschung.
  • Medronho, B., Andrade, R., Vivod, V., Östlund, Å., Miguel, M. G., Lindman, B., Voncina, B., Valente, A.J.M. Cyclodextrin-grafted cellulose: Psycio-chemical characterization. Carbohydrate Polymers (2012).
  • Medronho, B., Romano, A., Miguel, M.G., Stigsson, L., Lindman, B. (2012) Rationalizing cel-lulose (in)solubility: reviewing basic physicochemical aspects and role of hydrophobic interac-tions. Cellulose 19(3): 581–587.
  • *Nordqvist, P., Johansson, M., Khabbaz, F., Malmström, E. (2012) Characterization of enzy-matically hydrolyzed or heat treated wheat gluten by SE-HPLC and 13C-NMR: correlation with wood bonding performance. ACS Applied Materials and Interfaces.
  • Nordqvist, P., Lawther, M., Malmström, E., Khabbaz, F. (2012) Adhesive properties of wheat gluten after enzymatic hydrolysis or heat treatment – a comparative study. Industrial Crops and Products 38: 139–145.
  • Nordqvist, P., Nordgren, N., Khabbaz, F., Malmström, E. (2012) Plant proteins as wood adhe-sives: Bonding performance at the macro- and nanoscale. Industrial Crops and Products 44: 246–252.
  • Nordqvist, P., Thedjil, D.; Khosravi S., Lawther, M., Malmström, E., Khabbaz, F. (2012) Wheat gluten fractions as wood adhesives – glutenins versus gliadins. Journal of Applied Polymer Sci-ence 123(3): 1530–1538.
  • Nyrud, A.Q., Bringslimark, T., Englund, F. (2012) Wood use in a hospital environment: VOC emissions and air quality. European Journal of Wood and Wood Products 70(4): 541–543.
  • Olsson, S., Johansson, M., Westin, M., Östmark, E. (2012) Grafting of 2-hydroxy-4(2,3-epoxypropoxy)-benzophenone and epoxidized soybean oil to wood: Reaction conditions and ef-fects on the color stability of Scots pine. Polymer Degradation and Stability 97(9): 1779–1786.
  • Sandin, G., Peters, G.M., Svanström, M. (2012) Moving down the cause-effect chain of water and land use impacts: an LCA case study of textile fibres. Resources, Conservation and Recy-cling (accepted).
  • *Sedighi Moghaddam, M., Claesson, P. M., Wålinder M. E.P., Swerin, A. (2012) Comparison of different methods for studying wood wettability and liquid penetration. Wood Science and Technology.
  • Segerholm, K., Ibach, R., Wålinder, M.E.P. (2012) Moisture sorption in artificially aged wood-plastic composites. BioResources 7(1): 1283–1293.
  • Segerholm, B.K., Ibach, R.E., Westin, M. (2012) Moisture sorption, biological durability, and mechanical performance of WPC containing modified wood and polylactates. BioResources 7(4): 4575–4585.
  • Segerholm, B.K., Vellekoop, S., Wålinder, M.E.P. (2012) Process-related mechanical degrada-tion of the wood component in high-wood-content wood-plastic composites. Wood and Fiber Science 44(2): 1–10.
  • Sterley, M., Trey, S., Lundevall, Å., Olsson S. (2012) Influence of cure conditions on the prop-erties of a one-compenent moisture-cured polyurethane adhesive in the context of green gluing of wood. Journal of Applied Polymer Science 126(S1): E297–E304
  • Trey, S., Jafarzadeh, S., Johansson, M. (2012) In situ Polymerization of Polyaniline in Wood Veneers. ACS Applied Materials & Interfaces 4(3): 1760–1769
  • *Wadsö, L., Johansson, S., Pilgård, A., Alfredsen, G. (2012) The activity of a wood-decaying fungus during drying and rewetting cycles measured by isothermal calorimetry. Engineering in Life Sciences
  • *Wålinder, M., Larsson Brelid, P., Segerholm, K., Long, C. J. II, Dickerson, J.P. (2012) Wetta-bility of acetylated Southern yellow pine. International Wood Products Journal

Conference publications

  • Alfredsen, G., Flæte, P.O., Militz, H. (2012) A survey of factors affecting decay resistance of wood modified with acetic anhydride. In: Proceedings IRG Annual Meeting, Kuala Lumpur, Malaysia. 6–8 May. IRG/WP 12-40594, 15 pp.
  • Alfredsen, G., Flæte, P.O., Militz, H. (2012) Decay resistance of modified wood – A review. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slo-venia, 17–18 September, pp. 109–118.
  • Alfredsen, G., Flæte, P.O., Schrøder, A., Holte, S., Larnøy, E. (2012) Decking – Surface and system treatments after ten years of exposure. In: Proceedings of the 8th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE). Kaunas, Lithuania, 13–14 September, pp. 8–14.
  • Bardage, S., Collins, P., Henriksson, M., Meng, D., Olsson, S. (2012) Nanoparticles for UV Protection of Clear Coatings – Field and Laboratory Trials. In: Proceedings of the 8th Interna-tional Woodcoatings Congress. Amsterdam, The Netherlands, 30–31 October, Paper No. 32.
  • Bardage, S.L., Long II, C.J., Dickerson, J.P. (2012) On the Susceptibility of Acetylated Wood to Disfiguring Fungi. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slovenia, 17–18 September, pp. 81–87.
  • Bok, G., Johansson, P., Jermer, J. (2012) Mould growth on wood-based materials – a simulated in-service study. In: Proceedings IRG Annual Meeting. IRG/WP 12-20503, 10 pp.
  • Bollmus, S., Treu, A., Westin, M., Brynildsen, P., Militz, H. (2012) Use of Furfurylated Wood for the Production of Windows – Results from the WinFur Project. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slovenia, 17–18 September, pp. 99–107.
  • Brischke C, Meyer L, Alfredsen G, Humar M, Francis L, Flæte P O, Larsson-Brelid P (2012) Durability of timber products – Part 1: Inventory and evaluation of above ground data on natural durability of timbers. In: Proceedings IRG Annual Meeting, IRG/WP12-20498, 31 pp.
  • Brischke C, Meyer L, Alfredsen G, Humar M, Francis L. (2012) Durability of timber products – Part 2: Proposal for an IRGWP – Durability Database. In: Proceedings IRG Annual Meeting. IRG/WP 12-20497, 13 pp.
  • Brischke, C., Olberding, S., Meyer, L., Bornemann, T., Welzbacher, C.R. (2012) In-ground variability of decay intensity within a test field. In: Proceedings IRG Annual Meeting, IRG/WP 12-20496, 17 pp.
  • Gobakken, L.R., Høibø, O. (2012) Factors influencing mould growth and modelling of aesthetic service life. In: Wieland, S., Schnabel, T. (eds) COST Action FP1006 1st Workshop ‘Basics for Chemistry of Wood Surface Modification’. Kuchl/Salzburg, Austria, 25–27 April, ISBN 978-3-200-02623-0, pp. 83–85.
  • Gobakken, L.R., Vestøl, G. (2012) Effects of microclimate, wood temperature and surface col-our on fungal disfigurement on wooden claddings. In: Proceedings IRG Annual Meeting. Kuala Lumpur, Malaysia. 6–10 May, IRG/WP 12-20490, 10 pp.
  • Gobakken, L.R., Westin, M. (2012) Long-time performance of coated modified wooden clad-dings – Results after 8 years of outdoor exposure. In: The Sixth European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 379–387.
  • Jermer J, Andersson B-L (2012) Corrosion of fasteners in heat-treated wood – progress report after nine years’ exposure outdoors. In: Proceedings IRG Annual Meeting. IRG/WP 12-40601, 8 pp.
  • Jones, D. (2012) Life Since the European Thematic Network on Wood Modification – the First 10 Years. In: 6th European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 29–36.
  • Jones, D., Englund, F., Henriksson, M., Segerholm, B.K., Trey, S., Ziethén, R., Gonzales, S., Segui, L. (2012) Development of a novel wood based panel for use in internal door manufac-ture. In: 5th International Conference on Environmentally-Compatible Forest Products. Porto, Portugal, 5–7 September.
  • Mantanis, G., Jones, D. (2012) Innovative Modification of Wood with Nanoparticulate Treat-ment. In: Proceedings of the 6th European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 447–454.
  • thoughts. In: Proceedings of the EPNOE seminar on Polysaccharides as Source of Advanced and Sustainable Products. Wageningen, Netherlands, 31 Aug.
  • Meyer, L., Brischke, C., Pilgård, A. (2012) Modified Timber in Various Above Ground Expo-sures – Durability and Moisture Performance. In: The Sixth European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 137–144.
  • Meyer, L., Brischke, C., Pilgård, A. (2012) Moisture performance based wood durability test-ing. In: Proceedings IRG Annual Meeting. Kuala Lumpur, Malaysia, 6–10 May, IRG/WP 12-20495, 26 pp.
  • Olsson, S., Johansson, M., Westin, M., Östmark, E. (2012) Utilising Reactive UV Absorber and Epoxidised Soybean Oil for Enhanced UV Protection of Clear Coated Wood. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slovenia, 17–18 September, pp. 455–462.
  • Pilgård, A., Alfredsen, G., Fossdal, C.G., Long, II C.J., (2012) The effects of acetylation level on the growth of Postia placenta over 36 weeks. In: Proceedings IRG Annual Meeting. Kuala Lumpur, Malaysia, 6–10 May. IRG/WP 12-40589, 13 pp.
  • Ringman, R., Pilgård, A., Richter, K. (2012). Postia placenta Decay Mechanisms and Effects of Wood Modification. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slovenia, 17–18 September, pp. 119–126.
  • Rowell, R. (2012) Acoustical Properties of Acetylated Wood. In: Proceedings of the 6th Euro-pean conference on wood modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 421–428.
  • Sandin G., Pilgård A., Peters G. M., Svanström M. (2012) Environmental evaluation of a clear coating for exterior wood products: toxicological testing of nanoparticles and life cycle assess-ment. In: Proceedings of the 8th International Woodcoatings Congress. Amsterdam, The Neth-erlands, 30–31 October, Paper No. 33.
  • Sedighi Moghaddam, M., Claesson, P., Wålinder, M., Swerin, A. (2012) New approaches for studying wood wettability and liquid penetration by using Wilhelmy plate method. In: Proceed-ings of the 8th meeting of the Northern European Network for Wood Science and Engineering (WSE). Kaunas, Lithuania, 13–14 September, pp. 151–162.
  • Segerholm, B.K., Larsson Brelid, P., Roger Rowell, R. (2012) Chemically Modified Wood in Thermoplastic Composites. In: International Seminar on Wood Plastic Composites. Tokyo, Ja-pan, 26 November, 16 pp.
  • Segerholm, B.K., Larsson Brelid, P., Wålinder, M.E.P., Westin, M., Frisk, O. (2012) Biological outdoor durability of WPC with chemically modified wood. In: Proceedings of the 6th Europe-an conference on wood modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 47–54.
  • Segerholm, B.K., Wålinder, M.E.P. (2012) Inverse gas chromatography characterization of wood composite components. In: Proceedings of the 8th meeting of the Northern European Network for Wood Science and Engineering (WSE). Kaunas, Lithuania, 13–14 September. pp. 58–63.
  • Thaler, N., Alfredsen, G., Fossdal, C.G., (2012) Variation in two Postia placenta strains, MAD-698-R and FPRL 280 – mass loss, DNA content and gene expression. In: Proceedings IRG An-nual Meeting. Kuala Lumpur, Malaysia, 6–10 May. IRG/WP 12-10781, 15 pp.
  • Trey, S., Olsson, R., Ström, V., Berglund, L., Johansson, M. (2012) Fabrication of magnetic veneers. In: Proceedings of the 6th European Conference on Wood Modification (EWMC6). Ljubljana, Slovenia, 17–18 September, pp. 413–418.
  • Vestøl, G.I., Ross Gobakken, L. (2012) Field-testing of Norway Spruce Claddings with Moni-toring of Moisture Content, Material Temperature and Microclimate. In: Proceedings IRG An-nual Meeting. IRG/WP 12-20502, 7 pp.
  • Vollmer, S., Evans, P.D., (2012) Performance of Clear Coatings on Modified Wood Exposed to the Weather. In: Proceedings of the 6th European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 September, pp. 389–396.
  • Wålinder, M., Larsson Brelid, P., Segerholm, K., Long, C. J. II, Dickerson, J.P. (2012) Wetting characteristics and coatings penetrability in acetylated Southern yellow pine. In: Proceedings of the 6th European Conference on Wood Modification (ECWM6). Ljubljana, Slovenia, 17–18 Sep-tember, pp. 39–46.
  • Westin, M. (2012) Durability of furfurylated wood – Results from laboratory and field tests in the Ecobinders project. In: Proceedings IRG Annual Meeting. IRG/WP 12-40602, 6 pp.
Textbook chapters, theses and reports

Textbook chapters, theses and reports

  • Clemons, C.M., Rowell, R.M., Plackett, D., Segerholm, B.K. (2012) Chapter 13. Wood/nonwood thermoplastic composites. In: Rowell, R.M. (ed) Handbook of wood chemistry and wood composites. Second edition. Boca Raton, Florida: CRC Press, pp. 473–508.
  • Kihlman, M. (2012) Dissolution of cellulose for textile fibre application. Licentiate Thesis. Karlstad University, Faculty of Technology and Science, Department of Chemical Engineering, Karlstad University Studies 2012:16, ISSN 1403-8099.
  • Nordqvist, P. (2012) Exploring the Wood Adhesive Performance of Wheat Gluten. Doctoral thesis, KTH Royal Institute of Technology, Stockholm, Sweden, ISBN 978-91-7501-348-0.
  • Olsson, S. (2012) Enhancing UV-protection of Clear Coated Wood by utilizing Reactive UV-absorber and Epoxy Functionalized Soybean Oil. Licentiate Thesis. KTH, School of Chemical Science and Engineering (CHE), Fibre and Polymer Technology, Coating Technology, Trita-CHE-Report 2012:17, ISSN 1654-1081.
  • Segerholm, B.K. (2012) Characteristics of wood plastic composites based on modified wood – Moisture properties, biological performance and micromorphology. Doctoral Thesis, KTH Royal Institute of Technology, TRITA BYMA 2012:2, ISSN 0349-5752, ISBN 978-91-7501-554-5.
  • Thelandersson, S., Isaksson, T., Frühwald, E., Toratti, T., Viitanen, H., Grüll, G., Jermer, J., Suttie, E. (2012) Beständighet för utomhusträ ovan mark: Guide för utformning och materialval. SP rapport 2012:22, 27 pp.
Popular science publications
  • EcoBuild (2012) Vi bygger en hållbar framtid med biobaserade material. Brochure for EcoBuild phase 3.
  • Englund, F. (2012). En framtid för mode i ett hållbart samhälle? Nyhetsbrev SP Trä June, http://www.bwz.se/sp/b.aspx?vi=12&vid=477&ucrc=C32E3F38.
  • Hägerhed Engman, L., Ylmén, P., Englund, F. (2012) OPEN HOUSE – öppet europeiskt miljö-klassningssystem för byggnader. Bygg & teknik 104(2): 72–74.
  • Hellberg-Danielsson, M. (2012). Svensk viskos är björkkläder. Nerikes Allehanda 15 Septem-ber, pp. 6–7.
  • Jones, D. (2012). 6th European Conference for Wood Modification. Nyhetsbrev SP Trä No-vember, http://www.bwz.se/sp/b.aspx?vi=12&vid=588&ucrc=0D5AFA77.
  • Östmark, E. (2012) EcoBuilds 5:e årsmöte. Nyhetsbrev SP Trä March. http://www.bwz.se/sp/b.aspx?vi=12&vid=383&ucrc=CED38AAD.
  • Östmark, E. (2012) EcoBuild går in i fas 3. Nyhetsbrev SP Trä September. http://www.bwz.se/sp/b.aspx?vi=12&vid=538&ucrc=62F2DC5E.
  • Östmark, E. (2012) Roger Rowell gav doktorandkurs. Nyhetsbrev SP Trä May, http://www.bwz.se/sp/b.aspx?vi=12&vid=439&ucrc=E8966756.
  • Norway. Kebony named as a top 50 fastest growing clean technology company (2012) BYM Product and Industry News http://www.bymnews.com/news/newsDetails.php?id=112619.
  • Nussbaum, R. (2012) ForTex – Ekoeffektiva textilfibrer från skog. Nyhetsbrev SP Trä Novem-ber, http://www.bwz.se/sp/b.aspx?vi=12&vid=591&ucrc=B7604D1B.
  • Seltman, J. (2012) “Såga” med ljus. Nyhetsbrev SP Trä November, http://www.bwz.se/sp/b.aspx?vi=12&vid=583&ucrc=6E6B5578.
Additional presentations at conferences and seminars

International conferences

  • Englund, F., Henriksson, M., Jones, D., Segerholm, B.K., Trey, S., Ziethén, R., Nyström, B., Hedlund, E. (2012) Comparison of acoustic properties of biobased composite panels intended for door applications. 23rd Annual International SICOMP Conference. Piteå, 4–5 June.
  • Hagström, B. (2012) WPC for injection moulding. 2nd Avancell conference. Gothenburg, 2 October.
  • Jermer, J. (2012) Corrosion on nails and screws in preservative-treated wood. Nordiska Träskyddsdagar. Oslo, 13–14 November.
  • Rowell, R. (2012) Hierarchical Shift for Wood From Biocomposite to Biomaterial. BIOCOMP 2012 11th Pacific Rim Bio-Based Composites Symposium. Shizuoka, Japan, 27–30 November.
  • Sandin, G., Clancy, G., Heimersson, S., Peters, G. Svanström, M., ten Hoeve, M (2012) Clarify-ing the role of life cycle assessment in technical research and development projects: recommen-dations for project planning. 18th SETAC LCA Case Study Symposium. Copenhagen, Den-mark, 26–28 November.
  • Trey, S., Jafarzadeh, S., Johansson, M. (2012) In situ Polymerization of Polyaniline in Wood Veneers. 4th Nordic Wood Biorefinery Conference. Helsinki, Finland, 23–25 October.

National conferences and seminars

  • Jermer, J. (2012) Korrosion i träskyddsbehandlat virke. KMs temadag Fästelement. Borås, 4 September.
  • Nussbaum R. (2012) Ytors tålighet – utveckling och standardisering. TMFs temadag ”Framti-dens ytbehandling”. Nässjö, 28 November.
  • Östmark, E. (2012) EcoBuild – eko-effektiva och beständiga träbaserade material och produk-ter. TMFs dörr- och fönstergrupps möte. Kista, 7 November.
  • Östmark, E. (2012). EcoBuild. KTH – A Centre for Materials Research for Forest Products. Stockholm, 28 February.
  • Rowell, R. (2012) Wood chemistry, biocomposites and building materials. Stockholm, 3–4 and 10–11 April (PhD course).
  • Sandin, G., Östlund, Å. (2012) Towards Sustainable Fashion and Textiles. The Chalmers Day for a Sustainable Future. Gothenburg, 30 November.
  • Wålinder, M. (2012) Användningen av byggnadsmaterial från förnybara råvaror måste öka dras-tiskt. GS Facket Frukostseminarium om träbyggande. Stockholm, 16 oktober.
  • Wålinder, M. (2012) Biobaserade byggmaterial – förnybara möjligheter. SPs byggdagar. Borås, 4 October.
  • Westin, M. (2012) Forskning och utveckling av biokompositer, textilfibrer, modifierat trä, bio-baserade lim och ytbehandlingssystem på SP Trä = Kompetenscentrumet EcoBuild och Forsk-ningsprogrammet Mistra Future Fashion. Green factory Workshop. Borås, 23 November.
  • Westin, M. (2012) Mistra Future Fashion, framtidens hållbara mode. SP-dagen. Lund, 26 april.
  • Westin, M. (2012) Nu kraftsamlas det för skogens textilfibrer. PPT-seminarium. Kungälv, 26 November.

2011

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • Dvinskikh, S., Henriksson, M., Berglund, L., Furó, I. (2011) A multinuclear magnetic resonance imaging (MRI) study of wood with adsorbed water: Estimating bound water concentration and local wood density. Holzforschung 65(1): 103–107.
  • Dvinskikh, S., Henriksson, M., Mendicino, A.L., Fortino, S., Toratti, T. (2011) NMR imaging study and multi-Fickian numerical simulation of moisture transfer in Norway spruce samples. Engineering Structures 33: 3079–3086.
  • Eriksson, M., Hult, K., Malmström, E., Johansson, M., Trey, S., Martinelle, M. (2011) One-pot enzymatic polycondensation to telechelic methacrylate-functional oligoesters used for film for-mation. Polymer Chemistry 2(3): 714–719.
  • Holt, A. Karlström, G., Hermida-Ramón, J. M. (2011) Calculation of the Molecular and Atomic Properties of Selected Anions in Water. The Journal of Physical Chemistry B 115 (5): 1098–1104.
  • Karlsson, O., Sidorova, E., Morén, T. (2011) Influence of heat transferring media on durability of thermally modified wood. BioResources 6(1): 356–372.
  • Khosravi, S., Nordqvist, P., Khabbaz, F., Johansson M. (2011). Protein-based adhesives for particleboards – Effect of application process. Industrial Crops and Products 34(3): 1509–1515.
  • Kihlman, M., Wallberg, O., Stigsson, L., Germgård, U. (2011) Dissolution of dissolving pulp in alkaline solvents after steam explosion pretreatments. Holzforschung 65(4): 613-617.
  • Köhnke, T., Östlund, Å., Brelid, H. (2011) Adsorption of Arabinoxylan on Cellulosic Surfaces: Influence of Degree of Substitution and Substitution Pattern on Adsorption Characteristics. Bi-omacromolecules 12(7): 2633–2641.
  • Pilgård, A., Alfredsen, G., Gjelstrup Björdal C., Fossdal, C.G., Børja I. (2011) qPCR as a tool to study basidiomycete colonization in wooden field stakes. Holzforschung 65(6): 889–895.

Conference publications

  • Alfredsen, G. (2011) Functional genomics of wood degradation – a project summary. In: Pro-ceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engi-neering (WSE). Oslo, Norway, 27–28 October, pp. 7–12.
  • Alfredsen, G., Bollmus, S., Bader, T.K., Hofstedtter, K. (2011) Basidiomycete colonization of Scots pine sapwood quantified by qPCR and TGA. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-10750, 10 pp.
  • Bader, T.K., Hofstetter, K., Alfredsen, G., Bollmus, S. (2011) Decrease of stiffness properties of degraded wood predicted by means of micromechanical modeling. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-40570, 15 pp.
  • Bardage, S.L. (2011) Fungal disfigurement of acetylated wood. In: Proceedings of the 7th meet-ing of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE). Oslo, Nor-way, 27–28 October, pp. 19–24.
  • Behr, G., Larnøy, E., Bues, C.T. (2011) Treatability variation of Scots pine heartwood from Northern Europe. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-40563, 11 pp.
  • Brischke, C., Frühwald Hansson, E., Kavurmaci, D., Thelandersson, S. (2011) Decay hazard mapping for Europe. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-20463, 20 pp.
  • Brischke, C., Welzbacher, C.R., Meyer, L., Bornemann, T., Larsson-Brelid, P., Pilgård, A., Hansson, E., Westin, M., Rapp, A.O., Thelandersson, S., Jermer, J. (2011) Service life predic-tion of wooden components – Part 3: Approaching a comprehensive test methodology. In: Pro-ceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-20464, 25 pp.
  • Brischke, C., Welzbacher, C.R., Meyer, L., Bornemann, T., Larsson-Brelid, P., Pilgård, A., Frühwald-Flæte, P.O., Alfredsen, G., Evans, F.E. (2011) Natural durability of wood tested in different environments in Northern Europe. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-10747, 8 pp.
  • Gobakken, L.R., Bardage, S.L., Long II, C.J. (2011) Succession of staining fungi on acetylated wood and the effect of selected influencing factors. In: Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE). Oslo, Norway, 27–28 October, pp. 13–18.
  • Gobakken, L.R., Høibø, O.A. (2011) Aesthetic service life of coated and uncoated wooden cladding – influencing factors and modeling. In: Proceedings IRG Annual Meeting. Queens-town, New Zealand, 8–12 May, IRG/WP 11-20470, 20 pp.
  • Jermer, J. (2011) Service life of wood in outdoor above ground applications. In: VI. Congreso Nacional de Protección de la Madera. San Sebastián, Spain, 29–30 September 10 pp.
  • Jermer, J., Wong, A.H.H., Segerholm, K., Nilsson, T. (2011). Durability testing of coconut shell according to ENV 807. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-10761, 8 pp.
  • Johansson, I., Breyne, S., Egnell, E., Jermer, J. (2011) Re-use of casting timbers. In: Proceed-ings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-50283, 4 pp.
  • Kihlman, M., Stigsson, L., Westin, M., Germgård, U. (2011) Regenerated cellulosic fibres for textile applications. In: Proceeding of the 2011 IAWS Meeting annual meeting on Novel Materi-als from Wood or Cellulose. Stockholm, Sweden, 31 August–2 September, pp. 24–25.
  • Larnøy, E., Gobakken, L.R., Hietala, A.M. (2011) Quantification of four dark coloured mould fungi by real time PCR. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-10754, 7 pp.
  • Larsson Brelid, P., Brischke, C., Rapp, A.O., Hansson, M., Westin, M., Jermer, J., Pilgård, A. (2011) Methods of field data evaluation – time versus reliability. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-20466, 18 pp.
  • Medronho, B., Graça Miguel, M., Lindman, B., Romano, A., Stigsson, L. (2011). On the Mech-anism of Cellulose Dissolution: Solvents for cellulose dissolution, strategies and controversial
  • Appendix 2 15 EB Annual Report 2012. Version 2013-03-01
  • Nilsson, L.-O., Sandberg, K. (2011) A new model for wetting and drying of wood end-grain – with implications for durability and service-life. In: Proceedings IRG Annual Meeting. Queens-town, New Zealand, 8–12 May, IRG/WP 11-20477, 11 pp.
  • Olsson, S., Östmark, E., Ibach, R.E., Clemons, C.M., Segerholm, B.K., Englund, F. (2011). The use of esterified lignin for synthesis of durable composites. In: Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Enginering (WSE). Oslo, Norway, 27–28 October, pp. 173–178.
  • Olsson, S., Westin, M., Johansson, M., Evans, P., Östmark, E. (2011) Improving UV-protection of exterior wood by utilizing UV-absorber in combination with epoxy functionalized soybean oil. In: Proceedings of the 2011 IAWS Annual Meeting on Novel Materials from Wood or Cellu-lose. Stockholm, Sweden, 31 August–2 September, pp. 63–64.
  • Pilgård, A., Alfredsen, G., Fossdal, C.G., Long II, C. (2011). The effects of acetylation level on the growth of Postia placenta. In: Proceedings IRG Annual Meeting. Queenstown, New Zea-land, 8–12 May, IRG/WP 11-10751, 12 pp.
  • Segerholm, B.K., Ibach, R.E., Westin, M. (2011). Durability of PLA – Modified Wood Compo-sites. In: Proceedings of the 11th International Conference on Wood & Biofiber Plastic Compo-sites., Madison, WI, USA, 16–17 May.
  • Schmöllerl, Alfredsen, Fossdal, Westin, Steitz. (2011) Molecular investigation of Postia placen-ta growing in modified wood. In: Proceedings IRG Annual Meeting. Queenstown, New Zea-land, 8–12 May, IRG/WP 11-10756, 10 pp.
  • Segerholm, B.K., Wålinder, M.E.P., Bardage, S.L. (2011). Mould growth resistance of fungi-cide-containing WPC. In: Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE). Oslo, Norway, 27–28 October, pp. 25–30.
  • Sidorova, E., Trey, S., Englund, F. (2011) Modification of wood with an anti-oxidant tannin derivative: preliminary study. In: Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE). Oslo, Norway, 27–28 October, pp. 161–166.
  • Thelandersson, S., Isaksson, T., Suttie, E., Frühwald, E., Toratti, T., Grüll, G., Viitanen, H., Jermer, J. (2011) Quantitative design guideline for wood outdoors above ground applications. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-20465, 21 pp.
  • Trey, S., Johansson, M. (2011) In situ polymerization of polyaniline in veneers and the effect on material conductivity, morphology, and flame retardance. In: Proceeding of the 2011 IAWS Meeting annual meeting on Novel Materials from Wood or Cellulose. Stockholm, Sweden, 31 August–2 September, pp. 61–62.
  • Trey, S., Johansson, M. (2011) In-situ polymerization of polyaniline in veneers and the effect on material conductivity, morphology, and flame retardance. In: Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE). Oslo, Norway, 27–28 October, pp. 185–189.
  • Viitanen, H., Toratti, T., Makkonen, L., Thelandersson, S., Isaksson, T., Früwald, E., Jermer, J., Englund, F., Suttie, E. (2011). Modelling of service life and durability of wooden structure. In: Proceedings of 9th Nordic Symposium on Building Physics. Tampere, Finland, 29 May–2 June.
  • Wålinder, M., Gardner, D.J. (2011) Surface energy characteristics of maple wood particles coated with polystyrene-acrylic acid (PSAA) block copolymer. In: Proceeding of the 2011 IAWS Meeting annual meeting on Novel Materials from Wood or Cellulose. Stockholm, Swe-den, 31 August–2 September, pp. 66–67.
  • Westin, M., Alfredsen, G. (2011). Durability of modified wood in UC3 and UC4. Results from lab tests and 5 years testing in 3 fields. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-40562, 9 pp.
  • Ziethén, R., Bengtsson, C. (2011) Initial settings for machine strength graded structural timber. In: International Council for Research and Innovation in Building and Construction: Working Commission W18 – Timber Structures: CIB-W18 Meeting Forty-Four. Alghero, Italy, 29 Au-gust– 1 September, 11 pp.
  • Zimmer, K., Larnøy, E., Treu, A., Fongen, M. (2011) Slice – Cut and Analyze Laser Microdis-section (LMD): A method to produce sample material from modified wood for chemical quality analysis. In: Proceedings IRG Annual Meeting. Queenstown, New Zealand, 8–12 May, IRG/WP 11-20478, 12 pp.
Textbook chapters, theses and reports

Textbook chapters, theses and reports

  • Grüll, G., Podgorski, L., Georges, V., Bollmus, S., Jermer, J. (2011) WOODEXTER – Work Package 3: Interaction of wood and coatings – effect on the performance of wood products: Re-port on natural weathering trials. HFA Report No. FFG 443.
  • Khosravi, S. (2011) Protein-Based Adhesives for Particleboards. Licentiate thesis, KTH Royal Institute of Technology, Stockholm, Sweden, TRITA-CHE Report 2011:29.
  • Larsson Brelid, P., Jermer, J., Johansson, I. (2011) Fältförsök med träskyddsmedel för klass AB: Resultat efter 15 års exponering. SP Rapport 2011:70, ISBN 9789187017025.
  • Olsson, R., Fogelström, L., Martínez-Sanz, M., Henriksson, M. (2011) Cellulose nanofillers for food packaging. In: Lagaron J.-M. (ed) Multifunctional and nanoreinforced polymers for food packaging. Cambridge, UK: Woodhead.
  • Sandin, G., Peters, G., Pilgård, A., Svanström, M., Westin, M. (2011) Integrating sustainability consideration into product development: A practical tool for identifying critical social sustaina-bility indicators and experiences from real case application, In: Finkbeiner, M. (ed) Towards Life Cycle Sustainability Management. Dordrecht: Springer, pp. 3–14.
  • Suttie, E,, Englund, F., Viitanen, H., Podgorski, L., Bollmus, S., Grüll, G. (2011) Inspection proformas and images from buildings in Austria, Finland, France, Germany, Sweden and the United Kingdom. DVD from WoodExter Task 2.1, BRE Garston.
  • Suttie, E., Englund, F.,Viitanen, H., Thelandersson, S., Jermer, J., Grüll, G. (2011) Proforma and guidance document for performance inspection of exterior wood cladding and decking. BRE Report 274243.
  • Thelandersson, S., Suttie, E., Viitanen, H., Jermer, J., Isaksson, T., Grüll, G. (2011) Service life of wood in outdoor above ground applications: Engineering design guideline. Lund University, Report TVBK-3060/SP-Report 2011:15, 29 pp.
  • Thelandersson, S., Suttie, E., Viitanen, H., Jermer, J., Isaksson, T., Grüll, G. (2011) Service life of wood in outdoor above ground applications: Engineering design guideline: Background doc-ument. Lund University, Report TVBK-3061, 42 pp.
  • Vollmer, S. (2011) High performance clear-coat systems for wood used outdoors. Master’s the-sis, Faculty of Graduate Studies, University of British Columbia, Vancouver, Canada.
Popular science publications
  • Ahlfort, K. Magnus hittar skogsindustrins framtid (2011) KTH Campi.
  • Delaryd,C. (2011) 40 miljoner för miljövänliga kläder. Svenska Dagbladet http://www.svd.se/nyheter/inrikes/40-miljoner-for-miljovanliga-klader_6069999.svd.
  • Ekoeffektiv skogsråvara i modernt båtbygge (2011) Miljönytta.se http://miljonytta.se/upplevelser/ekoeffektiv-skogsravara-i-modernt-batbygge/.
  • Elmqvist, M (2011) Miljösmart träskydd i sikte. Teknik &Forskning (3): 13.
  • Fashion with a conscience. (2011) Nordstjernan.com. http://www.nordstjernan.com/news/organizations/3283/.
  • Forskning i bæredygtig mode får 40 mio. kr. (2011) FashionForum.dk. http://www.fashionforum.dk/forskning-i-bæredygtig-mode-får-40-mio-kr.
  • Forskningspengar till cellulosatextil (2011) Papernet.se. http://www.papernet.se/iuware.aspx?pageid=395&ssoid=136327.
  • ”Fuskteak” alternativ för däcket (2011) Teknik & Forskning (1): 4.
  • H&M och Myrorna i unik svensk forskning (2011) Dagenshandel.se. http://www.dagenshandel.se/dh/dagensh.nsf/0/C3F81E86BCDE0AB8C125786B0025E0A1?open.
  • Konsortium får forskningspengar (2011) Habit.se.
  • Ljung, S. (2011) Mode som ska hålla i längden . Teknik & Forskning (2): 8-10.
  • Med skogen som råvara föds nya, träbaserade material (2011) Träinformation (4): 14–15.
  • Nordberg, S. (2011)) Kebony – en tropisk kopia. Ny Teknik Automation http://www.nyteknik.se/nyheter/automation/processautomation/article3338993.ece.
  • Östlund, Å. (2011) Den 18–19 oktober 2011 hölls den första Avancell-konferensen. Nyhetsbrev SP Träteknik och träbyggande December.
  • Östmark, E. (2011) Emma Östmark tar över som EcoBuilds centrumledare. Nyhetsbrev SP Trä-teknik och träbyggande September.
  • Pegar till tyg från trä (2011) Mentoronline.se. http://www.mentoronline.se/iuware.aspx?pageid=132580&ssoid=136339.
  • Wålinder, M. (2011) Magnus Wålinder utnämnd till ny professor. Nyhetsbrev SP Träteknik och träbyggande June.
  • Westin, M. (2011) Textilfibrer ur träråvara. Nyhetsbrev SP Träteknik och träbyggande June.
  • Westin, M., Englund, F. (2011) Future Fashion. Nyhetsbrev SP Träteknik och träbyggande June.
  • Westin, M., Östlund, Å. Westin, M. (2011) Textilfibrer ur träråvara. Nyhetsbrev SP Träteknik och träbyggande December.
  • Sylvan, C. (2011) 80 miljoner ska göra svenska kläder bäst. Sydsvenska Dagbladet http://www.sydsvenskan.se/sverige/article1450831/80-miljoner-ska-gora-svenska-klader-varldsbast.html. http://campi.kth.se/magnus-hittar-skogsindustrins-framtid-1.202504.  Publicerad 2011-10-24
Additional presentations at conferences and seminars

International conferences

  • Bergner, A. (2011) Intelligent textiles. 1st Avancell Conference. Göteborg, Sweden, 18–19 Oc-tober (oral presentation).
  • Khosravi, S., Johansson, M., Nordqvist, P., Khabbaz, F. (2011) Protein-based adhesives for particleboards – Effect of application process. 48th Nordic Polymer Days. Stockholm, Sweden, 15–17 June (oral presentation).
  • Kihlman, M., Stigsson, L., Westin, M., Germgård, U. (2011) Regenerated cellulosic fibres for textile applications. 1st Avancell Conference. Göteborg, Sweden, 18–19 October (poster presen-tation).
  • Medronho, B., Miguel, M.G., Lindman, B., Romano, A., Stigsson, L. (2011) “Greener” solvents for cellulose dissolution: Strategies and controversial thoughts. 2nd International Polysaccharide Conference. Wageningen, The Netherlands, 29 August–2 September (oral presentation).
  • Medronho, B., Romano, A., Miguel, M.G., Lindman, B. (2011) Solvents for cellulose dissolu-tion: Strategies and controversial thoughts. 1st Avancell Conference. Göteborg, Sweden, 18–19 October (oral presentation).
  • Nordqvist, P., Khabbaz, F., Malmström, E. (2011) Wheat gluten as wood adhesive. 48th Nordic Polymer Days. Stockholm, Sweden, 15–17 June (oral presentation).
  • Olsson, S., Östmark, E., Ibach, R.E., Segerholm, K., Englund, F. (2011) The use of esterified lignin for synthesis of durable composites. 48th Nordic Polymer Days. Stockholm, Sweden, 15–17 June (poster presentation).
  • Sandin, G., Peters, G., Pilgård, A., Svanström, M., Westin, M. (2011) Sustainability assessment in product development: Experiences from two projects. Alliance for Global Sustainability An-nual Meeting. Göteborg, Sweden, 23–25 January (poster presentation).
  • Sandin, G., Peters, G., Pilgård, A., Svanström, M., Westin, M. (2011) Integrating sustainability consideration into product development: A practical tool for identifying critical social sustaina-bility indicators and experiences from real case application. Life Cycle Management Confer-ence. Berlin, Germany, 28–31 August (poster presentation).
  • Sandin, G., Peters, G., Svanström, M. (2011) Location dependency of the sustainability of tex-tile fibres. 1st Avancell Conference. Göteborg, Sweden, 18–19 October (poster presentation).
  • Salehi, A., Trey, S., Henriksson, G., Pagès, G., Dvinskikh, S., Furó, I., Johansson, M. (2011) Effect of wood constituents oxidation on unsaturated fatty acids. 7th meeting of the Nordic-Baltic Network in Wood material Science and Engineering (WSE). Oslo, Norway, 27–28 Octo-ber (poster presentation).
  • Östlund, Å. (2011) Dissolution of cellulose in TBAF/DMSO and the effect of water. Anselme Payen Award Symposium. 241st American Chemical Society National Meeting. Anaheim, USA, 27–31 March (oral presentation).
  • Östlund, Å., Köhnke, T., Söderqvist-Lindblad, M., Carlsson, S., Nyden, M., Nordstierna, L. (2011) NMR cryoporometry to investigate the fiber cell wall structure and the effect of added hemicellulose to reduce hornification. 241st American Chemical Society National Meeting. An-aheim, USA, 27–31 March (oral presentation).

National conferences and seminars

  • Jermer J. (2011) Träskydd. Lesson at Swedish University of Agricultural Sciences, Umeå, 4 March.
  • Jermer, J. (2011) Beständighetsdimensionering av trä utomhus ovan mark. Temadagar träskydd. Kolmården, Sweden, 17–18 November (oral presentation).
  • Larsson Brelid, P. (2011) ComTest – Det bästa av två världar. ComTest-dagen, Göteborg, Swe-den, 20 October (oral presentation).
  • Larsson Brelid, P. (2011) AB-försöket – Bäst i test efter 15 år. Temadagar träskydd. Kolmården, Sweden, 17–18 November (oral presentation).

2010

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • Bryne, L.E., Lausmaa, J., Ernstsson, M., Englund, F., Wålinder, M.E.P. (2010) Ageing of modi-fied wood. Part 2: Determination of surface composition of acetylated, furfurylated, and ther-mally modified wood by XPS and ToF-SIMS. Holzforschung 64: 305–313.
  • Bryne, L.E., Wålinder, M.E.P. (2010) Ageing of modified wood. Part 1: Wetting properties of acetylated, furfurylated, and thermally modified wood. Holzforschung 64: 295–304.
  • Eriksson, M., Boyer, A., Sinigoi, L., Johansson, M., Malmström, E., Hult, K., Trey, S., Marti-nelle, M. (2010) One-pot enzymatic route to tetraallyl ether functional oligoesters: Synthesis, UV curing, and characterization. Journal of Polymer Science Part A: Polymer Chemistry 48: 5289–5297.
  • Gobakken, L.R., Høibø, O.A., Solheim, H. (2010) Mould growth on paints with different sur-face structures when applied on wooden claddings exposed outdoors. International Biodegrada-tion & Biodeterioration 64(5): 339–345.
  • Gobakken, L.R., Høibø, O.A., Solheim, H. (2010) Factors influencing surface mould growth on wooden claddings exposed outdoors. Wood Material Science and Engineering 5(1): 1–12.
  • Gobakken, L.R., Lebow, P.K. (2010) Modelling mould growth on coated modified and unmodi-fied wood substrates exposed outdoors. Journal of Wood Science and Technology 44(2): 315–333.
  • Khosravi, S., Khabbaz, F., Nordqvist, P., Johansson, M. (2010) Protein-based adhesives for particleboards. Industrial Crops and Products 32(3): 275–283.
  • Lande, S., Høibø, O., Larnøy, E. (2010) Variation in treatability of Scots pine (Pinus sylvestris) by the chemical modification agent furfuryl alcohol dissolved in water. Wood Science and Technology 44(1): 105–118.
  • Lande, S., van Riel, S., Høibø, O.A., Schneider, M.H. (2010) Development of chemometric models based on near infrared spectroscopy and thermogravimetric analysis for predicting the treatment level of furfurylated Scots pine. Wood Science and Technology 44(2): 189–203.
  • Lindman, B., Karlström, G., Stigsson, L. (2010) On the mechanism of dissolution of cellulose. Journal of Molecular Liquids 156(1): 76–81.
  • Medronho, B., Rodrigues, M., Miguel, M. G. ,Olsson, U., Schmidt, C. (2010) Shear-Induced Defect Formation in a Nonionic Lamellar Phase. Langmuir 26(13): 11304–11313.
  • Nordqvist, P., Khabbaz, F., Malmström, E. (2010) Comparing bond strength and water re-sistance of alkali-modified soy protein isolate and wheat gluten adhesives. International Journal of Adhesion and Adhesives 30(2): 72–79.
  • Nordqvist, P., Thedjil, D., Khosravi, S., Lawther, M., Malmström, E., Khabbaz, F. (2010) Wheat Gluten Fractions as Wood Adhesives – Glutenins vs Gliadins. Journal of Applied Poly-mer Science123: 1530–1538.
  • Ohlsson K., Bergman T., Sundell P.-E., Deltin T., Tran I., Svensson M., Johansson M. (2010) Novel coil coating systems using fatty acid based reactive diluents. Progress in Organic Coat-ings 73(4): 291–293.
  • Östlund, Å., Bernin, D., Nordstierna, L., Nydén, M. (2010) Chemical shift imaging NMR to track gel formation. Journal of Colloid and Interface Science 344: 238–240.
  • Östlund, Å., Köhnke, T., Nordstierna, L., Nydén, M. (2010) NMR cryoporometry to study the fiber wall structure and the effect of drying. Cellulose 17: 321–328.
  • Pilgård, A., Alfredsen, G., Hietala, A. (2010) Quantification of fungal colonization in modified wood – qPCR as a tool for studies on Trametes versicolor. Holzforschung 64: 645–651.
  • Pilgård, A., De Vetter, L., Van Acker, J., Westin, M. (2010) Toxic hazard of leachates from furfurylated wood – Comparison between two different aquatic organisms. Environmental toxicology and chemistry 29(5): 1067–1071.
  • Pilgård, A., Treu, A., Westin, M., Gosselink, R., van Zeeland, A.N.T. (2010) Toxic hazard and chemical analysis on leachates from furfurylated wood. Environmental toxicology and Chemistry 29(9): 1918–1924.
  • Trey, S., Netrval, J., Berglund, L., Johansson, M. (2010) Electron Beam Initiated Polymeriza-tion of Poly(ethylene glycol) Based Wood Impregnants. ACS Materials and Interfaces 2(11): 3352–3362
  • Vrana, T., Gudmundsson, K. (2010) Comparison of fibrous insulations – cellulose and stone wool in terms of moisture properties resulting from condensation and ice formation. Construction and Building Materials 24(7): 1151–1157

Conference publications

  • Alfredsen, G., Fossdal, C.G. (2010) Postia placenta gene expression during growth in furfu-rylated wood. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-10734, 7 pp.
  • Bergman, Ö., Jermer, J. (2010) Glued laminated poles – Progress report after 30 years’ testing. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-20427, 7 pp.
  • Evans, P.D., Chowdhury, M.J. (2010) Photostabilization of wood with higher molecular weight UV absorbers. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-30524, 12 pp.
  • Gobakken, L.R. (2010) Effects of global climate change on mould growth – interactions of concern. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 08-20382, 10 pp.
  • Johansson, P., Jermer, J. (2010) Mould growth on wood-based materials – a comparative study. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-20455, 7 pp.
  • Larsson-Brelid, P., Westin, M. (2010) Biological degradation of acetylated wood after 18 years in ground contact and 10 years in marine water. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-40522, 8 pp.
  • Liu, C., Ahniyaz, A., Evans, P.D. (2010) Preliminary observations of the photostabilization of wood surfaces with cerium oxide nanoparticles. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-40504, 10 pp.
  • Olsson, S., Johansson, M., Westin, M., Östmark, E. (2010) Covalently attached UV-absorbers for improved UV-protection of wood. In: Proceedings 5th European Conference on Wood Mod-ification. Riga, Latvia, pp. 263–266.
  • Pilgård, A., Björdal, C. (2010) Microscopy evaluation of microbial decay patterns in wood stakes after 6 years in soil contact. Stockholm: International Research Group on Wood Protec-tion, IRG Document IRG/WP 10-10715, 10 pp.
  • Pilgård, A., Westin, M., Treu, A., van Zeeland, A.N.T., Gosselink, R.J.A. (2010) Chemical analysis and toxic hazard of leachates from furfurylated wood. In: Proceedings 5th European Conference on Wood Modification., Riga, Latvia, pp. 291–300.
  • Rowell, R. M. (2010) Heat treatments of wood to improve decay resistance. In: Proceedings of the 6th meeting of the Nordic-Baltic network in wood material science and engineering. 21–22 October, Tallin, Estonia, ISBN 978-9949-23-033-4, pp. 23–33.
  • Rowell, R. M. (2010) Production of acetylated wood fibre: Part 1: Refining acetylated chips; Part 2: Exploding acetylated chips; Part 3: Acetylation of chips in a refiner. In: Hill, Militz, C.A.S., H., Andersons, B. (eds) Proceedings of the Fifth European Conference on Wood Modi-fication. 20–21 September, Riga, Latvia, ISBN 978-9984-49-135-6, pp. 73–80.
  • Rowell, R.M. (2010) Wood preservation based on heat treatments. In: Proceedings 4th Interna-tional Conference on Environmentally Compatible Forest Products. Oporto, Portugal, Septem-ber.
  • Segerholm, K., Wålinder, M. (2010) Dimensional changes due to water sorption in high wood-content WPCs prepared with modified wood. In: Hill, C.A.S., Militz, H., Andersons, B. (eds) Proceedings of the Fifth European Conference on Wood Modification. Riga, Latvia, 20–21 Sep-tember, ISBN 978-9984-49-135-6, pp. 201–204.
  • Segerholm, B.K., Wålinder, M.E.P., Holmberg, D. (2010) Adhesion studies of Scots pine-polypropylene bond using ABES. In: Proceedings of the 6th meeting of the Nordic-Baltic net-work in wood material science and engineering, October 21–22, Tallin, Estonia, ISBN 978-9949-23-033-4, pp. 142–146.
  • Sidorova, E., Morén, T. (2010) The behavior of heat treated wooden cladding exposed to ex-treme climate changes. In: Proceedings of the 6th meeting of the Nordic-Baltic network in wood material science and engineering, Tallin, Estonia, 21–22 October, ISBN 978-9949-23-033-4, pp. 147–154.
  • Suttie, E., Englund, F. (2010) Service life prediction for exterior timber cladding. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-20460, 7 pp.
  • Trey, S.M., Netrval, J., Berglund, L., Johansson, M. (2010) Electron beam initiated polymeriza-tion of poly(ethylene glycol) based wood impregnants. In: Hill, C.A.S., Militz, H., Andersons, B. (eds) Proceedings of the Fifth European Conference on Wood Modification. Riga, Latvia, 20–21 September, ISBN 978-9984-49-135-6, pp. 301–306.
  • Wadsö, L., Pilgård, A., Alfredsen, G. (2010) Measurements of rot fungal activity as a function of moisture content by isothermal calorimetry. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 10-20428, 10 pp.
  • Wålinder, M., Segerholm, K., Larsson Brelid, P., Westin, M. (2010) Liquids and Coatings Wettability and Penetrability of Acetylated Scots Pine Sapwood. In: Hill, C.A.S., Militz, H., Andersons, B. (eds) Proceedings of the Fifth European Conference on Wood Modification. Riga, Latvia, 20–21 September, ISBN 978-9984-49-135-6, pp. 381–388.
  • Wålinder, M.E.P., Segerholm, B.K., Westin, M. (2010) Durability of High Wood-Content WPCs. In: Proceedings of the 53rd International Convention Society of Wood Science and Technology/UNECE-TC. Palais des Nations, Geneva, Switzerland, 11–15 October, Paper WS-89, 10 pp.
  • Westin, M., Jermer, J., Edlund, M.-L. Larsson Brelid, P., Johansson, I. (2010) Field trials of wood preservatives in UC3 retention. Part 1. Durability results after 13 years in and above ground. Stockholm: International Research Group on Wood Protection, IRG Document10-30548, 11 pp.
Textbook chapters, theses and reports

Textbook chapters, theses and reports

  • Edlund, F. (2010). Standardization related to Service Life Planning. State-of-the-art . SP Report 2010:37.
  • Englund, F. (2010). Durability by design: Wood cladding and decking – an overview of guide-lines and information sources. SP Report 2010:38.
  • Eriksson, M. (2010) Lipase-Catalyzed Syntheses of Telechelic Polyesters. PhD Thesis. School of Biotechnology, Royal Institute of Technology, Stockholm, Sweden, ISBN 978-91-7415-574-7.
  • Pilgård, A. (2010) Fungal degradation patterns and toxicity of furfurylated wood. PhD Thesis, Chalmers University of Technology, Gothenburg, Sweden, ISBN/ISSN 978-91-7385-380-4.
  • Rowell, R.M., Ibach, R.E., Nilsson, T. (2010) Wood durability and stability without toxicity. In: Rowell, R.M., Calderia, F., Rowell, J.K. (eds) Sustainable Development in the Forest Products Industry. Porto, Portugal: Fernando Pessoa Press, Chapter 8, pp. 181–212.
Popular science publications
  • Anon (2010) Ny maskin på SP Trätek. Kombinerad dragprovmaskin och limpress. NTT Såg & Trä
  • Eriksson, M. (2010) Ny teknisk doktor. Nyheter från SP Trätek. April 2010. NTT Såg & Trä.
  • Englund, F. (2010). Framtida ljudabsorberande dörrar ska innehålla mer biobaserad råvara. Ny-heter från SP Trätek. Augusti 2010. NTT Såg & Trä.
  • Henriksson, M. (2010) WoodLife: Nanopartiklar i klarlacker och trälimmer. Nyheter från SP Trätek. December 2010. NTT Såg & Trä.
  • Jermer, J. (2010) Mögelpåväxt på olika träbaserade material. Nyheter från SP Trätek. Oktober 2010. NTT Såg & Trä.
  • Jermer, J. (2010) Research hits new heights. Timber Trades Journal 7/14 August 2010, p. 25.
  • Ljung, S. (2010) Skogsråvara kan bli alternativ till bomull. Teknik & Forskning (3): 4.
  • Pilgård, A. (2010) Ny filosofie doktor. Nyheter från SP Trätek. August 2010. NTT Såg & Trä.
  • Sterley, M. (2010). Ny utrustning till laboratoriet i Stockholm. Nyheter från SP Trätek. Februari 2010. NTT Såg & Trä.
  • Tiger, J. (2010) Doktor på hållbart och miljösmart trä. Teknik & Forskning (3): 16–18.
  • Trey, S. (2010) Stort spännande fiberprojekt inom EcoBuild. Nyheter från SP Trätek. April 2010. NTT Såg & Trä.
  • Wålinder, M. (2010) EcoBuild på nästa raksträcka. Nyheter från SP Trätek. February 2010. NTT Såg & Trä.
Additional presentations at conferences and seminars

International conferences

  • Kihlman, M., Medronho, B., Trey, S., Stigsson, L., Germgård, U. (2010) CelluNova – a future textile fiber concept based on sustainable raw material. 11th European Workshop of Lignocellu-losics and Pulp. Hamburg, Germany, 16–19 August (poster presentation).
  • Medronho, B. (2010) XII International Macromolecular Colloquium and 7th International Sym-posium on Natural Polymers and Composites. Gramado, RS, Brazil, 7–10 September (oral presentation).
  • Rowell, R.M. (2010) Overview: Modification of Wood. Annual conference of the Nordic Wood preservation Council. Copenhagen, 4–5 November (oral presentation).
  • Trey, S., Netrval, J., Berglund, L. and Johansson, M. (2010) Electron Beam Initiated Polymeri-zation of Poly(ethylene glycol) Based Wood Impregnants. European Symposium of Photopoly-mer Science. Mulhouse, France, November (poster presentation).

National conferences and seminars

  • Östlund, Å. (2010) Cellulose research from a molecular view – from forest to textile fibers. Scanautomatic seminarium. Gothenburg, 26 October.
  • Rowell, R.M. (2010) Sustainability – Forest industries beyond the headlights. ForestBeyond Event. October 28 (oral presentation) http://www.kth.se/polopoly_fs/1.199959!/Menu/general/column-content/attachment/Roger%20Rowell%20ForestBeyond%202010.pdf (accessed on 28 February 2013).
  • Stigsson, L. (2010) “CelluNova project” – High quality textile fibers from the forest. Wood Fusion meeting. Gothenburg, 25 August.
  • Wålinder, M. (2010) ”Mycket snack och lite verkstad”. Wood Fusion meeting. Gothenburg, 24 August (panel discussion about material research dissemination).

2009

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • De Vetter, L., Pilgård, A., Treu, A., Westin, M., Van Acker, J. (2009) Combined evaluation of durability and ecotoxicity: A case study on furfurylated wood. Wood Material Science and En-gineering 4(1-2): 30–36.
  • Englund, F., Bryne, L.E., Ernstsson, M., Lausmaa, J., Wålinder, M. (2009) Some Aspects on the Determination of Surface Chemical Composition and Wettability of Modified Wood. Wood Ma-terial Science and Engineering 4(1-2): 80-85.
  • Evans, P.D. (2009) Weathering and photostability of modified wood. Wood Material Science and Engineering, 4(1-2): 2–13.
  • Johansson, K. Bergman, T., Johansson, M. (2009) Hyperbranched Aliphatic Polyesters and Re-active Diluents in Thermally Cured Coil Coatings. ACS Applied Materials & Interfaces 1(1): 211–217.
  • Militz, H., Lande, S. (2009) Keynote: Challenges in wood modification technology on the way to practical applications. Wood Material Science and Engineering 4(1-2): 23–29.
  • Rowell, R.M., Ibach, R.E., McSweeny, J., Nilsson, T. (2009) Understanding decay resistance, dimensional stability and strength changes in heat treated and acetylated wood. Wood Material Science and Engineering 4(1-2): 14–22.
  • Wålinder, M., Omidvar, A., Seltman, J., Segerholm, K. (2009) Micromorphology Studies of Modified Wood Using a Surface Preparation Technique Based on UV-Laser Ablation. Wood Material Science and Engineering 4(1-2): 46–51
  • Westin, M., Sterley, M. Rossi, F., Hervé, J.-J. (2009) Compreg-type of products by furfurylation during hot-pressing. Wood Material Science and Engineering 4(1-2): 67–75

Conference publications

  • Alfredsen, G., Fossdal, C-G. (2009) Postia placenta gene expression of oxidative and carbohy-drate metabolism related genes during growth in furfurylated wood. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 09-10701, 7 pp.
  • Alfredsen, G., Westin, M. (2009) Durability of modified wood – Laboratory vs field perfor-mance. In: Proceedings of the Fourth European Conference on Wood Modification. SP Tech-nical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 515–522.
  • Appendix 2 12 EB Annual Report 2012. Version 2013-03-01
  • Brynildsen, P., Bendiksen, R. (2009) State-of-the-art Kebony factory and its main products. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April. pp. 37–42.
  • Englund, F., Bryne, L.E., Ernstsson, M., Lausmaa, J., Wålinder, M. (2009) Some Aspects on the Determination of Surface Chemical Composition and Wettability of Modified Wood. In: Pro-ceedings of the Fourth European Conference on Wood Modification. SP Technical Research In-stitute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 553–560.
  • Englund, F., Militz, H., Segerholm, B.K. (eds) (2009) Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technol-ogy, Stockholm, Sweden, 27–29 April, 584 pp.
  • Evans, P.D. (2009) Keynote: Weathering and photostability of modified wood. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 541–550.
  • Henriksson, M., Sterley, M., Danvind, J. (2009) Glulam posts with thermally modified spruce for outdoor applications. In: Proceedings of the Fourth European Conference on Wood Modifi-cation. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 577–584.
  • Henriksson, M., Sterley, M., Danvind, J., Westin, M. (2009) Evaluation of Adhesive Bonds in Glulam Posts with Thermally Modified Spruce. In: Proceedings of the International Conference on Wood Adhesives. Lake Tahoe, USA, 28–30 September.
  • Johansson, K., Kärrfelt, Y., Johansson, M. (2009) Novel coil coating concept for modified wood. In: Proceedings of the Fourth European Conference on Wood Modification, SP Tech-nical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 213–216.
  • Jones, D., Lawther, M., Torgilson, R., Simonson, R. (2009) Acetylated wood fibres – Next stop: Commercialisation. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 505–513.
  • Khosravi, S., Johansson, M., Khabbaz, F., Malmström, E., Nordqvist, P. (2009) Protein-based binders for particle boards. In: Proceedings of the International Conference on Wood Adhesives. Lake Tahoe, USA, 28–30 September.
  • Khosravi, S., Johansson, M., Khabbaz, F., Nordqvist, P. (2009) Protein-based binders for parti-cle boards. In: Proceedings of the Nordic Polymer Days. Copenhagen, Denmark, 25–27 May.
  • Militz, H., Lande, S. (2009) Keynote: Challenges in wood modification technology on the way to practical applications. In: Proceedings of the Fourth European Conference on Wood Modifi-cation. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 3–12.
  • Nordqvist, P., Khabbaz, F., Malmström, E. (2009) Plant proteins as biobased binders for the wood industry. In: Proceedings of the Nordic Polymer Days. Copenhagen, Denmark, 25–27 May.
  • Nordqvist, P., Khabbaz, F., Malmström, E. (2009) Protein-based binders for particle boards. In: Proceedings of the International Conference on Wood Adhesives. Lake Tahoe, USA, 28–30 September.
  • Östmark, E., Lawther, M., Ziethén, R., Nordqvist, P., Khabbaz, F., Malmström, E., Westin, M. (2009) Bio-resin bonded acetylated OSB. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stock-holm, Sweden, 27–29 April, pp. 531–538.
  • Pilgård, A., Alfredsen, G. (2009) A better understanding of the mode of action of furfurylated wood. In: Bergstedt. A. (ed) Proceedings of the 5th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE). Copenhagen, Denmark, 1–2 October, ISBN 978-87-7903-437-2, pp. 13–19.
  • Pilgård, A., Alfredsen, G., Børja, I., Björdal, C. (2009) Durability and fungal colonisation pat-terns in wood samples after six years in soil contact evaluated with qPCR, microscopy, TGA, chitin and ergosterol assays. Stockholm: International Research Group on Wood Protection. IRG Document IRG/WP 09-20402, 13 pp.
  • Puttmann, S., Krause, A., Pilgård, A., Treu, A., Militz, H. (2009) Furfurylated wood for window constructions. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 569–576.
  • Rowell, R.M. (2009) Hardening of wood. In: Bergstedt, A. (ed) Proceedings of the 5th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE). Copenhagen, Denmark, 1–2 October, ISBN 978-87-7903-437-2, pp. 5–11.
  • Rowell, R.M., Ibach, R.E., McSweeny, J., Nilsson, T. (2009) Keynote: Understanding decay resistance, dimensional stability and strength changes in heat treated and acetylated wood. In: Proceedings of the Fourth European Conference on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 489–502.
  • Segerholm, K., Omidvar, A., Wålinder, M.E.P. (2009) Acetylation to minimize water uptake and deformation of high wood content WPC. In: Proceedings of the Fourth European Confer-ence on Wood Modification. SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 239–242.
  • Segerholm, B.K., Westin, M., Larsson Brelid, P., Wålinder, M.E.P. (2009) Wood plastic com-posites made from modified wood and CAP. In: Proceedings of the 4th Wood Fibre Polymer Composites International Symposium. Bordeaux, France, 30–31 March.
  • Wålinder, M., Omidvar, A., Seltman, J., Segerholm, K. (2009) Micromorphology Studies of Modified Wood Using a Surface Preparation Technique Based on UV-Laser Ablation. In: Pro-ceedings of the Fourth European Conference on Wood Modification. SP Technical Research In-stitute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 103–110.
  • Wålinder, M.E.P., Segerholm, B.K., Söderström, O. (2009) Water sorption properties and dimensional changes of high wood-content WPC. In: Bergstedt, A. (ed) Proceedings of the 5th Meeting of the Nordic Baltic Network in Wood Material Science & Engineering (WSE). Copen-hagen, Denmark, 1–2 October, ISBN 978-87-7903-437-2, pp. 153–160.
  • Westin, M., Sterley, M. Rossi, F., Hervé, J.-J. (2009). Compreg-type of products by furfuryla-tion during hot-pressing. In: Proceedings of the Fourth European Conference on Wood Modifi-cation, SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Sweden, 27–29 April, pp. 561–568.
  • Ziethén, R., Brynildsen, P., Lande, S., Kristoffersen, J., Westin, M. (2009) Kebony – an alterna-tive to teak for boat decking. In: Proceedings of the Fourth European Conference on Wood Modification, SP Technical Research Institute of Sweden, Wood Technology, Stockholm, Swe-den, 27–29 April, pp. 523–530.
Textbook chapters, theses and reports

Textbook chapters, theses and reports

  • Galland, S. (2009) Microstructure and Micromechanical Studies of Injection Moulded Chemi-cally Modified Wood/Poly(lactic acid) Composites. Master’s thesis, Luleå University of Tech-nology, 2009:103, ISSN 1653-0187, ISRN: LTU-PB-EX–09/103–SE.
  • Gobakken, L.R. (2009) Surface mould growth on painted and unpainted wood – influencing factors, modelling and aesthetic serice life. Doctoral Thesis, Norwegian Univ. of Life Sciences, Thesis 2009:32, ISBN 978-82-575-0900-2, ISSN: 1503–1667.
  • Schneider, M., Westin, M., Lande, S. (2009) Furfurylated Wood. In: McGraw-Hill Yearbook of Science & Technology. McGraw-Hill Professional, ISBN 978-007-160562-5, pp. 133–135.
Popular science publications
  • Eriksson, T. (2009) Rätt tid för svenska bränslen (Porträtt av Lars Stigsson). VINNOVANYTT (2): 15–17.
  • ’’Grön’’ spånskiva utvecklas av svenska forskare (2009) Miljörapporten 2009-05-22.
  • ’Grön’’ spånskiva utvecklas av svenska forskare (2009) Byggvärlden 2009-05-29.
  • Jermer, J. (2009) Utvärdering av metallfria träskyddsmedel. Nyheter från SP Trätek. Februari 2009. NTT Såg & Trä.
  • Östmark, E. (2009) Mer beständigt klarlackat trä utomhus med epoxiderade oljor. Nyheter från SP Trätek. April 2009. NTT Såg & Trä.
  • Saxén, R. (2009) Bioentreprenör ut i fingerspetsarna (Intervju med Lars Stigsson). Nordisk Papperstidning (1): 18–20.

2008

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • Gobakken, L.R., Westin, M. (2008) Surface mould growth on five modified wood substrates coated with three different coating systems when exposed outdoors. International Biodegrada-tion and Biodeterioration 62: 397–402.
  • Inoue, M., S. Kawai, R. Rowell, M. Wålinder (2008). Dimensional stabilization of compressed laminated veneer lumber by hot pressing in an air-tight frame. Wood Material Science and En-gineering 3(3-4): 126–130.
  • Inoue, M., Morooka, T., Rowell, R.M., Norimoto, M., Englund, F. (2008). Mechanism of partial fixation of compressed wood based on a matrix non-softening method. Wood Material Science and Engineering 3(3-4): 119–125.
  • Johansson, K., Johansson, M. (2008) Fatty acid methyl ester as reactive diluent in thermally cured solvent-borne coil-coatings – The effect of fatty acid pattern on the curing performance and final properties. Progress in Organic Coatings 63: 155–159.
  • Lande, S., Westin, M., Schneider, M. (2008) Development of modified wood products based on furan chemistry. Molecular Crystals and Liquid Crystals 484: 367–378.
  • Larsson-Brelid P., Wålinder, M., Westin, M., Rowell, R.M (2008) EcoBuild – a center for de-velopment of fully biobased material systems and furniture applications. Molecular Crystals and Liquid Crystals 484: 257/[623]–264/[630].
  • Nordstierna, L., Lande, S., Westin, M., Karlsson, O., Furó, I. (2008) Towards novel wood-based materials: Chemical bonds between lignin-like model molecules and poly(furfuryl alcohol) studied by NMR. Holzforschung, 62(6): 709–713.

Conference publications

  • Alfredsen, G., Jacobsen, B., Evans, F., Edlund, M.-L. (2008) Decking – Surface and system treatments. In: Proceedings of the 4th meeting of the Nordic Baltic Network in Wood Material Science & Engineering. Riga, Latvia, November 13–14, ISBN 978-9984-39-675-0, pp. 90–95.
  • Alfredsen, G., Pilgård, A., Hietala, A. (2008) A step towards a better understanding of fungal colonization of modified wood – QRT-PCR studies. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 08-10653, 8 pp.
  • Bryne, L.E., Lausmaa, J., Ernstsson, M., Englund, F., Wålinder, M.E.P., Söderström, O. (2008) UV-laser irradiated wood – Some aspects on micromorphology, wettability, surface composition and liquid permeability. In: Proceedings of the 4th meeting of the Nordic Baltic Network in Wood Material Science & Engineering, Riga, Latvia, 13–14 November, ISBN 978-9984-39-675-0, pp. 75–82.
  • Englund, F., Van Acker, J., Rapp, A. (2008) Report Performance Classification – a strategy for wooden products. In: Proceedings of the COST Action E37 Final Conference. Bordeaux, France, 28–30 September, pp. 53–62.
  • Evans, F., Flæte, P. O., Alfredsen, G. (2008) Natural durability of different wood species in above ground applications – Weight and MOE loss. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 08-10667. 14 pp.
  • Gobakken, L.R., Mattsson, J., Alfredsen, G. (2008) In-service performance of wood depends upon the critical in-situ conditions. Stockholm: International Research Group on Wood Protec-tion, IRG Document IRG/WP 08-20382, 12 pp.
  • Larnøy E, Lande S, Vestøl G (2008) Variations of Furfuryl alcohol and Wolmanit CX-8 treata-bility of pine sapwood within and between trees. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 08-40421, 10 pp.
  • Pilgård, A. (2008) An overview of available DNA-based applications and results relevant for wood protection. In: Proceedings of the 4th meeting of the Nordic Baltic Network in Wood Ma-terial Science & Engineering. Riga, Latvia, 13–14 November, ISBN 978-9984-39-675-0, pp. 24–29.
  • Pilgård, A., Westin, M. (2008) Ecotoxicity of furfurylated wood – Effect of leachate on aquatic bacteria. Stockholm: International Research Group on Wood Protection. IRG Document IRG/WP 08-50250. 12 pp.
  • Vestøl, G.I., Gobakken, L.R., Sivertsen, M.S. (2008) Levetid til trefasader. In: Årsmelding 2007. Institutt for Naturforvaltning, Universitetet for miljø- og biovitenskap (University of Life Sciences), pp. 16–19.
  • Westin, M. (2008) Report on the COST Action E37 Round Robin test. In: Proceedings of the COST Action E37 Final Conference. Bordeaux, France, 28–30 September, pp. 119–124.
  • Westin, M., Larsson-Brelid, P., Segerholm, B.K., van den Oever, M. (2008) Wood Plastic Composites from modified wood. Part 3. Durability of WPCs with bioderived matrix. Stock-hollm: International Research Group on Wood Protection. IRG Document IRG/WP 08-40423, 15 pp.
  • Ziethén, R., Jermer, J., Clang, A. (2008) Cantilever bending test of furfurylated poles. Stock-holm: International Research Group on Wood Protection. IRG Document IRG/WP 08-40424, 8 pp.
Textbook chapters, theses and reports

Textbook chapters, theses and reports 

  • Bryne, L.E. (2008) Aspects on wettability and surface composition of modified wood. Licentiate Thesis, KTH the Royal Institute of Technology. Div. of Building Materials. TRITA-BYMA 2008:1, ISBN 978-91-7178-952-5.
  • Isaksson T. (2008) Methods for predicting durability and service life for wood. Div. of Structur-al Engineering, Lund University, Sweden, Report TVBK-3058.
  • Johansson, K. (2008) Thermally Cured Coil-Coatings Utilizing Novel Resins and Fatty Acid Methyl Esters as Reactive Diluents. Doctoral Thesis in Polymer Technology, KTH, Stockholm, Sweden, ISBN 978-91-7415-097-1.
  • Lande, S. (2008) Furfurylation of wood – Wood modification by the use of furfuryl alcohol. Doctoral Thesis, Norwegian Univ. of Life Sciences, Thesis 2008:3, ISBN 978-82-575-0814-2, ISSN: 0802-3220.
  • Lande, S., Eikenes, M., Westin, M., Schneider, M. (2008) Furfurylation of Wood: Chemistry, Properties, and Commercialization. In: Schultz, T.P., Militz, M., Freeman, M.H., Goodell, B, and Nicholas, D.D. (eds) Development of Commercial Wood Preservatives – Efficacy, Envi-ronmental, and Health Issues. ACS symposium series 982, ISBN 978-0-8412-3951-7, pp. 337–355.
Popular science publications
  • Alternativa metoder till impregnering skyddar mot röta, men har svårt för solen (2008). NTT Såg & Trä (6).
  • Larsson Brelid, P. (2008) SP satsar stort – bygger nytt EcoBuild-laboratorium. Nyheter från SP Trätek. May 2008. NTT Såg & Trä. http://www.habit.se/iuware.aspx?pageid=1780&ssoid=136724.
  • Ljung, S. (2008) På jakt efter hållbar klarlack. Teknik & Forskning (4): 14–15.
  • Vegetable oil can replace traditional solvent (2008) SSAB Swedish Steel News International (2): 8–9.
  • Winroth, C.B. (2008) Teknikutveckling ger träindustrin en renässans. Framtidens Basindustri p. 16.
Additional presentations at conferences and seminars

International conferences

  • Brynildsen, P. (2008) Kebony market introduction. COST Action E37 Seminar on “market chal-lenges for new technologies”. Hersonisos, Greece, 21 April, http://www.bfafh.de/inst4/45/ppt/10brynilds.pdf (accessed on 28 February 2013).
  • Mazela, B., Englund, F. (2008) COST Action E37 WG3 ‘Properties’: Outcome overview. Presentation at the COST Action E37 Final Conference. Bordeaux, France, 28–30 September, http://www.bfafh.de/inst4/45/ppt/11mazela.pdf (accessed on 28 February 2013).
  • Nilsson, T. (2008) Testing durability of wood in terrestrial microcosms and according to EN 252. COST Action E37 Seminar on “Service Life Prediction –SLP”. Hersonisos, Greece, 21 April, http://www.bfafh.de/inst4/45/ppt/10nilssn.pdf (accessed on 28 February 2013).

2007

Scientific publications

Publications in peer-reviewed journals (submitted for publication marked with *)

  • Hochmanska, P., Mazela, B., Westin, M. (2007) Biological durability of wood treated with silanes and siloxanes. Annals of Warsaw Agricultural University – SGGW, Forestry and Wood technology 61.
  • Johansson, K., Johansson, M. (2007) Fatty acid methyl esters as reactive diluents in coil-coatings. Polymer Preprints 48(2): 857–858.
  • Mazela, B., Hochmanska, P., Domagalski, P., Westin, M. (2007) Biological durability of OHT wood. Annals of Warsaw Agricultural University – SGGW, Forestry and Wood technology 61.
  • Segerholm, B.K., Walkenström, P., Nyström, B., Wålinder, M.E.P., Larsson Brelid, P. (2007) Micromorphology, moisture sorption and mechanical properties of a biocomposite based on acetylated wood particles and cellulose ester. Wood Material Science and Engineering 2(3-4): 106–117.

Conference publications

  • Brynildsen, P., Myhre, E. (2007) Commercial development of VisorWood® and Kebony® Furfu-rylated wood. In: Hill, C.A.S., Jones, D., Militz, H., Ormodroyd, G.A. (eds) Proceedings of the 3rd European Conference on Wood Modification. Cardiff, UK, 15–16 October, pp. 11–18.
  • Edlund, M.-L., Jermer, J. (2007) Durability of some alternatives to preservative-treated wood. Progress report 2: Results from field tests after 5 years’ exposure. Stockholm: International Re-search Group on Wood Protection, IRG Document IRG/WP 07-30442, 10 pp.
  • Larnøy, E., Westin, M., Källander, B., Lande, S. (2007) Wood furfurylation process develop-ment – Part 1: Oscillating pressure method. Stockholm: International Research Group on Wood Protection, IRG Document IRG/WP 07-40376, 10 pp.
  • Larsson-Brelid, P., Westin, M. (2007) Acetylated wood – Results from long term field tests. In: Hill, C.A.S., Jones, D., Militz, H., Ormodroyd, G.A. (eds) Proceedings of the 3rd European Conference on Wood Modification. Cardiff, UK, 15–16 October, pp. 71–78.
  • Nordstierna, L., Lande, S., Westin, M. (2007) 1H NMR demonstration of chemical bonds be-tween lignin-like model molecules and poly(furfuryl alcohol): Relevance to wood furfurylation. In: Hill, C.A.S., Jones, D., Militz, H. and Ormodroyd, G.A. (eds) Proceedings of the 3rd Euro-pean Conference on Wood Modification. Cardiff, UK, 15–16 October, pp. 41–47.
  • Rowell, R.M., Ibach, R.E., Nilsson, T. (2007) Influence of moisture on brown rot fungal attack on wood. In: Proceedings of the 3rd meeting of the Nordic-Baltic Network in Wood Material Science and Engineering. Helsinki, Finland, 29–30 October, ISBN 951-45-9098-8, pp.64–69.
  • Segerholm, B.K., Rowell, R.M., Larsson Brelid, P., Wålinder, M.E.P., Westin, M., ALfredsen, G. (2007) Improved durability and moisture sorption characteristics of extruded WPCs made from chemically modified wood. In: Proceedings of the 9th International Vonference on Wood & Biofiber Plastic Composites. Madison, WI, USA, 21–23 May, pp. 251–256 (Received the “Best Student Formal Presentation” award).
  • Segerholm, B.K., Rowell, R.M., Larsson Brelid, P., Wålinder, M.E.P., Westin, M., Söderström, O. (2007) Micromorphology and durability of WPCs made from modified wood. In: Proceed-ings of the 3rd meeting of the Nordic-Baltic Network in Wood Material Science and Engineering. Helsinki, Finland, 29–30 October, ISBN 951-45-9098-8, pp. 57–63.
  • Van Riel, S., Lande, S., Larnøy, E., Eikenes, M. (2007) Quality control of furfurylated Scots pine by TGA. In: Hill, C.A.S., Jones, D., Militz, H., Ormodroyd, G.A. (eds) Proceedings of the 3rd European Conference on Wood Modification. Cardiff, UK, 15–16 October, pp. 423–430.
  • Westin, M., Larnøy, E., Lande, S. (2007) Wood furfurylation process development – Part 2: Lowry impregnation trials. Stockholm: International Research Group on Wood Protection. IRG Document IRG/WP 07-40377, 9 pp.
  • Westin, M., Rapp. A.O., Nilsson, T. (2007) Marine borer resistance of modified wood- Results from seven years in field. Stockholm: International Research Group on Wood Protection. IRG Document IRG/WP 07-40375, 7 pp.
  • Westin, M., Rowell, R.M., Nilsson, T. (2007) Acetylated fibreboards – Results from over ten years of field and commodity testing. In: Spear, m. (ed) Proceedings of the 9th International Panel Products Symposium, Cardiff, UK, 17–19 October, pp. 11–18.
  • Westin, M., Alfredsen, G. (2007). Durability of modified wood in three different soil types. In: Hill, C.A.S., Jones, D., Militz, H., Ormodroyd, G.A. (eds) Proceedings of the 3rd European Conference on Wood Modification. Cardiff, UK, 15–16 October, pp. 309–315.
Textbook chapters, theses and reports

Textbook chapters, theses and reports

  • Segerholm, K. (2007) Wood Plastic Composites made from modified wood – Aspects on mois-ture sorption, micromorphology and durability. Licentiate Thesis, KTH, Royal Institute of Technology, Div. of Building Materials, TRITA-BYMA 2007:3, ISBN 978-91-7178-823-8, 23 pp.
Popular science publications
  • Wålinder, M. (2007) EcoBuild – ett kompetenscentrum för eko-effektiva och innovativa träba-serade material. Nyheter från SP Trätek. September 2007. NTT Såg & Trä.
  • Sundström, N. (2007) 100 miljoner ska utveckla ny träteknik. Sveaskog Forum (2): 13.
  • Dahl, J. (2006) 100 miljoner till träteknik. Provning och Forskning (2): 4–5.